检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王海涛 陈晏育[2] 王建东[1] 杨彬 莫彦 WANG Haitao;CHEN Yanyu;WANG Jiandong;YANG Bin;MO Yan(Department of Irrigation and Drainage,China Institute of Water Resources and Hydropower Research,Beijing 100048,China;Beijing IWHR Corporation,China Institute of Water Resources and Hydropower Research,Beijing 100048,China)
机构地区:[1]中国水利水电科学研究院水利研究所,北京100048 [2]中国水利水电科学研究院北京中水科工程总公司,北京100048
出 处:《排灌机械工程学报》2018年第4期340-346,353,共8页Journal of Drainage and Irrigation Machinery Engineering
基 金:国家"十二五"科技支撑计划项目(2014BAD12B05);中国水科院基本科研业务费项目(ID0145B602017;ID0145C042017)
摘 要:基于文丘里施肥器综合工作性能指标测试研究,以期获得文丘里施肥器结构优化设计建议.研究选用规格为DN 20的6种不同材质的国内外文丘里施肥器,基于不同进口压力和进出口压差条件,系统针对文丘里施肥器在压力能耗、吸肥效率以及振动与空化等综合性能指标开展了测试研究.结果表明:文丘里施肥器吸肥临界压差与进口压力存在显著的线性正相关;相同进口压力下,国内文丘里施肥器最大吸肥量普遍明显低于国外同类产品,且振动与空化现象受压差变化敏感性较强;同一模具下,收缩率较小材质的施肥器制造偏差小,吸肥性能好,UPVC可作为生产施肥器的优选原料之一;此外,文丘里施肥器存在与其内部结构相对应的吸肥量上限,压差增大后导致振动与空化现象的加强是抑制文丘里施肥器吸肥能力进一步提升的重要原因.In order to obtain some suggestions for optimal structure design of Venturi injector,some comprehensive indicators of working performance for Venturi injector were evaluated.Based on the conditions of different inlet pressures and pressure differences between inlet and outlet,six DN 20 Venturi injectors with different materials were systematically studied for pressure loss,efficiency in absor-bing fertilizer,cavitation-vibration and so on.The results show that critical pressure difference has an obviously positive correlation with inlet pressure.Under the same inlet pressure,the maximum rate of flow in absorbing fertilizer for homemade Venturi injector is less than that for the foreign same product universally,and the cavitation and vibration of homemade Venturi injector are sensitive to the variation of pressure.For the same mold size,the material with low mold shrinkage performance has smaller manufacturing error,and its suction performance is better.UPVC could be recommended as one of the proper raw materials for the manufacture of Venturi injector.In addition,each Venturi injector has the theoretic upper limit of the suction amount corresponding with its internal structure parameters.The cavitation is strengthened with pressure difference increasing,which is one of the important reasons for the not further improving of the efficiency in absorbing fertilizer.
分 类 号:S224.2[农业科学—农业机械化工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28