光透射法在电子烟气溶胶定量测定中的应用  

Application of light transmission method in quantitative determination of aerosol in electronic cigarette

作　　者：于涛 韩敬美 郑绪东 李志强 陈焰[1] 汤建国 YU Tao;HAN Jingmei;ZHENG Xudong;LI Zhiqiang;CHEN Yan;TANG Jianguo(Faculty of Information Engineering and Automation,Kunming University of Science and Technology,Kunming 650504,China;Technology Center of China Tobacco Yunnan Industrial Co.,Ltd.,Kunming 650202,China)

机构地区：[1]昆明理工大学信息工程与自动化学院,昆明650504 [2]云南中烟工业有限责任公司技术中心,昆明650202

出　　处：《中国科技论文》2018年第2期213-217,共5页China Sciencepaper

基　　金：云南省应用基础研究资助项目(KKSA201331004);科技协作资助项目(KKK0201603081)

摘　　要：针对电子烟气溶胶的检测手段多存在非在线、非定量测量的问题,提出基于朗伯-比尔定律的测量方法。首先,搭建样机系统进行光透射法原理分析;其次,采用高精度电子秤称重校准确定光透射消光系数;再后,根据消光系数计算气溶胶浓度,实现定量化,开发了一台电子烟烟雾测量工程样机。实验结果表明,该工程样机能同时实现实时在线、定量测量的功能,且根据光强理论所得浓度与实际称得浓度相对误差小于10%,解决了电子烟气溶胶定量化测量的难题。To solve the problem of non-online and non-quantitative measurement of electronic smoke aerosol,a Lambert-Beer's law-based measurement method is proposed.First of all,the prototype system is built for light transmission analysis.Then,high-precision electronic scale weighing calibration is used to determine the light transmission extinction coefficient.Finally,the aerosol concentration is calculated to achieve quantification,according to the extinction coefficient.An electronic cigarette smoke measurement engineering prototype is developed.The experimental results show that the prototype can simultaneously realize real-time online and quantitative measurement.And the relative error between the concentration obtained from the light intensity theory and the actual value is less than 10%,which solves the problem of quantitative measurement of aerosol.

关 键 词：电子烟 气溶肢 光透射 实时在线 定量化 

分 类 号：TP216[自动化与计算机技术—检测技术与自动化装置]