泰钢950mm HC轧机改造  

Reformation of 950mm HC rolling mill for taishan steel

作　　者：刘松[1] 窦锋[1] 贺琪[1] 王大号[1] 魏维刚[1] 赵晓辉[1] 黄庆学[2] 周存龙[3] LIU Song;DOU Feng;HE Qi;WANG Da-hao;WEI Wei-gang;ZHAO Xiao-hui;HUANG Qing-xue;ZHOU Cun-long(China Heavy Machinery Research Institute Co.,Ltd.,Xi’an 7102,China;Taiyuan University of Technology,Taiyuan,030024,China;Taiyuan University of Science and Technology,Taiyuan,030024,China)

机构地区：[1]中国重型机械研究院股份公司,陕西西安710032 [2]太原理工大学,山西太原030024 [3]太原科技大学,山西太原030024

出　　处：《重型机械》2018年第2期85-88,共4页Heavy Machinery

摘　　要：应用户轧制薄带的需求,对现有950mm HC轧机进行改造。本着充分利旧的原则,在计算和论证并的基础上确立整体改造方案,进而对镶块、辊系、主传动和轨道等进行了详细改造。改造后实现了一轧程生产厚度为0.15~0.25 mm的冷硬产品,并将厚度波动控制在±10μm以内。投产以来该机组运行状况良好,用户正在研讨对车间另一台950 mm轧机进行类似的改造。Existing 950 m m H C rolling mill is reformed to meet the needs of produce thinner strip.Based on the principle of taking full advantage of the old,overall reforming program is established on the basis of precise calculation and demonstration.A n d then mosaiced block,roller system,main drive system and rails etc.are reformed in detail.Thickness of 0.15?0.25 m m chilled products is produced in just rolling schedule after the reformation,and thickness tolerance of these products is controlled within土10 jjim.Since the reformed set has been in good condition,the user is exploring to carry out a similar reformation for another 9 5 0 m m mill in this workshop.After the rolling mill are reformed,the unit is running well,and it provides a reference for transformation of similar equipment.

关 键 词：HC轧机 改造 薄带 

分 类 号：TG335.5[金属学及工艺—金属压力加工]