三种机械密封材料的摩擦磨损性能研究  被引量:8

Study on Friction and Wear Properties of Three Kinds of Mechanical Seal Materials

在线阅读下载全文

作  者:王旭东[1] 汪彩芬[1] 朱彩强[1] 严彪杰 黄大鹏 白彬[1] WANG Xudong;WANG Caifen;ZHU Caiqiang;YAN Biaojie;HUANG Dapeng;BAI Bin(Science and Technology on Surface Physics and Chemistry Laboratory,Mianyang 621907;China General Nuclear Power Group,Shenzhen 518028)

机构地区:[1]表面物理与化学重点实验室,绵阳621907 [2]中国广核集团有限公司,深圳518028

出  处:《材料导报》2017年第A01期463-466,476,共5页Materials Reports

摘  要:研究了3种核主泵用机械密封陶瓷材料(氮化硅、氧化铝和碳化硅)在室温干摩擦条件下及水润滑条件下分别与氮化硅陶瓷球对磨的摩擦磨损性能。研究结果表明,在与氮化硅球干摩擦的3种材料中氧化铝陶瓷具有最大的摩擦系数和最小的磨损质量,氮化硅具有最小的摩擦系数。在氮化硅陶瓷自配对摩擦副摩擦磨损试验中,水润滑条件下氮化硅摩擦系数及摩擦质量损失都有很大程度的减小,且摩擦系数随转速增加而减小。综合考虑力学性能和摩擦磨损性能,选择氮化硅陶瓷作为核主泵机械密封材料更合适。The friction and wear properties of three kinds of mechanical seal ceramic materials(silicon nitride,alumina and si-licon carbide)used for nuclear coolant pump were studied.The three ceramics were milled with silicon nitride ceramic ball at room temperature in dry friction condition and silicon nitride self-paired friction were milled in water lubrication condition.The results show that the alumina ceramic has the biggest friction coefficient in the three kinds of materials but the least wear weight loss,and the silicon nitride has the minimum friction coefficient.The friction coefficient and weight loss of silicon nitride under water lubrication condition were greatly reduced,with the increase of rotating speed,the friction coefficient decreased.Based on a comprehensive consideration of mechanical properties and wear properties,selecting silicon nitride ceramics as seal material for nuclear coolant pump is a better choice.

关 键 词:氮化硅陶瓷 自配对 水润滑 摩擦磨损 摩擦系数 

分 类 号:TB383[一般工业技术—材料科学与工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象