预制综合管廊橡胶密封垫受压性能研究及断面设计  

Study of Compression Performance and Cross-section Design of Rubber Gasket for Prefabricated Utility Tunnel

作　　者：张铨婧 莫海鸿[1,2] 黄臣瑞 陈俊生[1,2] ZHANG Quanjing;MO Haihong;HUANG Chenru;CHEN Junsheng(School of Civil Engineering and Transportation,South China University of Technology,Guangzhou 510640,Guangdong,China;State Key Laboratory of Subtropical Building Science,South China University of Technology,Guangzhou 510640,Guangdong,China)

机构地区：[1]华南理工大学土木与交通学院,广东广州510640 [2]华南理工大学亚热带建筑科学国家重点实验室,广东广州510640

出　　处：《隧道建设（中英文）》2018年第3期399-405,共7页Tunnel Construction

摘　　要：为解决预制综合管廊橡胶密封垫断面形式对橡胶密封垫压缩性能的影响问题,基于橡胶密封垫压缩试验,结合通用有限元数值模拟软件MSC.Marc,将试验结果与数值模拟结果进行对比,证明采用有限元方法模拟橡胶压缩过程以及分析橡胶密封垫受压性能的可靠性。然后,利用有限元软件MSC.Marc探讨不同开槽和开孔形式对橡胶密封垫受压性能的影响。结果表明:1)当橡胶密封垫的压缩度为50%时,随着开槽面积和开孔面积的增大,接触应力以及装配力减小;2)当开槽面积相同时,接触应力和装配力受开槽数量的影响较小,受开槽形状的影响较大;3)当开孔面积相同时,开孔数量以及排列方式对接触应力和装配力有一定的影响。In order to learn the influence of cross-section form of rubber gasket for prefabricated utility tunnel on the compression performance of the rubber gasket,the finite element numerical simulation software MSC.Marc is used,and the experimental results are compared with the simulated ones.And then,the influence of different grooving and opening forms of rubber gasket on the compression performance is discussed by MSC.Marc.The results show that:(1)The contact stress and compression force decrease with grooving area and opening area increase when the compression degree of the rubber gasket is 50%.(2)The contact stress and compression force are affected little by grooving number,but much by grooving shapes when the grooving areas are the same.(3)The contact stress and compression force are affect by opening number and opening arrangement mode when the opening areas are the some.

关 键 词：预制综合管廊 橡胶密封垫 断面形式 压缩试验 数值模拟 

分 类 号：U455.46[建筑科学—桥梁与隧道工程]