检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈阿强 黄青山[1,2] 耿淑君 杨超[1,2] CHEN Aqiang;HUANG Qingshan;GENG Shujun;YANG Chao(Qingdao Institute of Bioenergy and Bioprocess Technology,Chinese Academy of Sciences,Qingdao 266101,Shandong,China;Key Laboratory of Green Process and Engineering,Institute of Process Engineering,Chinese Academy of Sciences,Beijing 100190,China)
机构地区:[1]中国科学院青岛生物能源与过程研究所,山东青岛266101 [2]中国科学院过程工程研究所,中国科学院绿色过程与工程重点实验室,北京100190
出 处:《化工进展》2018年第4期1257-1266,共10页Chemical Industry and Engineering Progress
基 金:国家重点研发计划(2016YFB0301701)、国家自然科学基金(91434114,21376254)及中国科学院科研装备研制项目(YZ201641)。
摘 要:喷射反应器是一种重要的化工过程强化设备,可有效强化传质与传热过程、加快反应速率、提高反应产率,近年来在多个领域得到应用。本文对两种典型喷射反应器的结构及其工作原理进行了描述,系统地分析了各操作参数和结构参数对气体吸入量和气泡直径的影响规律,指出研究气体吸入和气泡破碎两种机制的必要性。对采用计算流体力学方法模拟喷射反应器内气液两相流进行了分析,指出Mixture模型适合研究气体吸入量,无法准确描述气泡运动和破碎这两个重要过程,提出采用计算流体力学与群体平衡模型结合的方法进行模拟,关键在于建立适合喷射反应器的气泡破碎频率模型。另外,结合工业应用的实际情况,强调了加入催化剂颗粒相的多相流分析对于指导工业应用的重要意义。Jet reactors are important equipment for process intensification and they have been applied in many industries in recent years.They can significantly enhance the mass and heat transfer,speed up the reaction rate and promote reaction yield.In this work,two structural styles of jet reactors and the hydrodynamic characteristics of gas-liquid two phase flow in these reactors were reviewed.Firstly,configurations and working principles of these two kinds of jet reactors were described.Secondly,influences of operating and structural parameters on the gas induction rate and bubble diameter were analyzed,respectively.It was pointed out that more studies should be conducted on the mechanisms of gas entrainment and bubble breakage.Finally,reviews on the modeling of gas-liquid flow using the computational fluid dynamics in the jet reactors were presented.It was noteworthy that although Mixture multiphase model can reproduce gas entrainment rate accurately,it cannot be employed to predict the processes of bubble motion and breakage,which were very important for the hydrodynamic characteristics.It was recommended that these two processes can be well described by combining Euler-Euler model with Population Balance Model.When the Population Balance Model was employed,an appropriate bubble breakage frequency model should be set up at first.Additionally,catalyst particle phase should also be taken into account since it existed in various multiphase catalytic reactions in industrial application,which can influence flow patterns.Gas-liquid-solid three phase flow simulation can produce more realistic results and it would play an important role in guiding the industrial applications of the jet reactors.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49