剪切破坏型钢筋混凝土柱的抗剪承载力分析模型  

Shear strength model of shear-critical reinforced concrete columns

作　　者：余波[1] 吴然立 陈冰 陶伯雄 YU Bo;WU Ranli;CHEN Bing;TAO Boxiong(Key Laboratory of Engineering Disaster Prevention and Structural Safety of China Ministry of Education,Guangxi Key Laboratory of Disaster Prevention and Engineering Safety,School of Civil Engineering and Architecture,Guangxi University,Guangxi Nanning,530004,China)

机构地区：[1]广西大学土木建筑工程学院,工程防灾与结构安全教育部重点实验室,广西防灾减灾与工程安全重点实验室,南宁530004

出　　处：《振动与冲击》2018年第8期180-189,共10页Journal of Vibration and Shock

基　　金：国家自然科学基金(51368006;51478125;51668008);广西重点实验室系统性研究项目(2013ZDX06)

摘　　要：针对传统模型无法考虑轴压比影响和需要引入经验位移延性修正系数所存在的缺陷,研究建立了剪切破坏型钢筋混凝土(RC)柱的改进抗剪承载力分析模型。结合变角桁架-拱模型的变形协调条件和考虑轴压力影响的临界斜裂缝倾角模型,建立了能够综合考虑轴压比影响和桁架-拱模型变形协调条件的改进抗剪承载力分析模型。分析了轴压比对剪切破坏型RC柱抗剪承载力的影响机理,从而有效克服了传统模型无法考虑轴压比影响和需要引入经验位移延性修正系数所存在的缺陷。通过与试验数据和国内外现有模型的对比分析,验证了该模型的有效性和适用性。In order to overcome the disadvantages of traditional modes which cannot take into account the influence of axial load ratio and need to introduce empirical corrected factor of displacement ductility,an improved shear strength model for shear-critical reinforced concrete(RC)column was proposed.Firstly,an improved shear strength model for RC columns which takes into consideration the influences of axial load ratio as well as the deformation compatibility condition of variable angle truss-arch model was established based on the critical crack angle model that takes into account influence of axial load ratio as well as the deformation compatibility condition of the variable angle truss-arch model.Then the influence of axial load ratio on the shear strength of shear-critical RC columns was discussed.The proposed model overcomes the disadvantages of traditional models.Finally,the applicability and accuracy of the proposed model were validated by comparing with the experimental data and existed models.

关 键 词：钢筋混凝土柱 剪切破坏 抗剪承载力 变角桁架-拱模型 临界斜裂缝倾角 轴压比 

分 类 号：TU311.4[建筑科学—结构工程]