检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:唐升[1] 王天翔 雷浩丹 侯榆青[1] 吕亚林 TANG Sheng;WANG Tian-xiang;LEI Hao-dan;HOU Yu-qing;LüYa-lin(College of Information Science and Technology,Northwest University,Xi’an 710127,China;Ji’nan Metrological Verification and Testing Institute,Ji’nan 250002,China)
机构地区:[1]西北大学信息科学与技术学院,西安710127 [2]济南市计量检定测试院,济南250002
出 处:《时间频率学报》2018年第1期17-26,共10页Journal of Time and Frequency
基 金:国家自然科学基金资助项目(11403018);中国科学院精密导航定位与定时技术重点实验室开放基金(2014PNTT04)
摘 要:针对弦波信号间的相位差测量问题,提出了一种基于FPGA的相关法测量技术方案,着重分析了同步采样对相位差测量精度影响,详细阐述了FPGA基础上使用硬件描述语言实现测量算法的关键技术,并搭建实验平台对所研制的相位差测量原理样机进行了性能测试。实验结果表明,针对100 Hz低频弦波信号之间的相位差的测量,0~45°范围之内相对测量误差小于1.4%。In view of the problem of measuring the phase difference between the sinusoidal signals,a technical scheme using correlation method based on FPGA is proposed.The effect of simultaneous sampling on the phase difference measurement accuracy is analyzed,and the technical characteristics of the measurement algorithm using hardware description language based FPGA is introduced.An experimental platform is built to test the performance of the measuring system,and the corresponding test method is proposed.The experimental results show that the phase difference between two 100 Hz sinusoidal signals can be evaluated with the relative measurement errors smaller than 1.4%within the phase difference range of 45°.
关 键 词:相位差 同步采样 相关法 FPGA CORDIC
分 类 号:TM935.1[电气工程—电力电子与电力传动]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117