检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:廉振山 张礼[1,2] LIAN Zhen-shan;ZHANG Li(Safety Institute,China Coal Research Institute Co.,Ltd.,Beijing 100013,China;State Key Laboratory of Coal Resource High Effective Mining&Clean Utilization(China Coal Research Institute),Beijing 100013,China)
机构地区:[1]煤炭科学技术研究院有限公司安全分院,北京100013 [2]煤炭资源高效开采与洁净利用国家重点实验室(煤炭科学研究总院),北京100013
出 处:《煤矿开采》2018年第2期92-96,共5页Coal Mining Technology
基 金:国家自然科学基金项目(51604154)
摘 要:针对高瓦斯综放工作面瓦斯超限问题,根据宏岩煤矿10101工作面的实际地质条件和开采工艺,基于工作面覆岩破坏高度和高抽巷层位理论,分析认为高抽巷层位理论高度应布置在23~50.5m之内。并通过数值模拟进行验证,得出9+10煤采动后L_4石灰岩以下的岩层全部垮落,垮落带发育高度为21m左右,结合该矿的实际情况确定高抽巷层位布置在6煤中。To gas transfinite problem of high gas top coal caving working face,according geological situation and mining technical of 10101 working face of Hongyan coal mine,based on overburden broken height of working face and high level drainage roadway position theory,the theoretical height should be arranged within 23~50.5m,and then verified by numerical simulation,the following conclusion was reached that all strata below L 4 limestone would collapsed after 9+10 coal seam was mined,collapse zone development height was about 21m,at last,high level position was layout in No.6 coal seam.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7