矿用隔爆型干式变压器温升试验方法研究  

Research on Temperature Test Method of Mining Flameproof Dry-type Transformer

作　　者：冯利国 Feng Li-guo(CCTEG Shenyang Research Institute,Fushun Liaoning 113122)

机构地区：[1]煤科集团沈阳研究院有限公司,辽宁抚顺113122

出　　处：《新型工业化》2017年第8期1-4,共4页The Journal of New Industrialization

基　　金：中国煤炭科工集团有限公司科技创新基金(2013MS014)

摘　　要：大型机械化采煤技术不断发展,工作面刮板输送机和采煤机的功率不断增加,对煤矿电网的容量的需求也不断增加。结合煤炭在我国能源结构主体地位和煤矿安全生产形势,首先对矿用隔爆型干式变压器的组成结构、一次侧与二次侧电压等级、安全标志等进行阐述,然后分析矿用隔爆型干式变压器温升起因、故障发展过程和标准要求,最后总结了直接负载法、相互负载法和短路法三种温升试验检验方法1。Large mechanized coal winning technology development,face scraper conveyor and the growing power of shearer,the demand for coal mine power grid capacity is also increasing.Combined with the principal position of coal in China’s energy structure and coal mine production safety situation,fi rst of all,the composition of mining fl ameproof dry-type transformer structure,the primary side and secondary side voltage grade,elaborates the safety sign and so on,and then analysis of mining flameproof dry-type transformer temperature rise is caused,fault development and standard requirement,finally summarizes the direct load method,mutual load and short circuit test method of three kinds of temperature rise test.

关 键 词：煤矿 干式变压器 故障 温升 短路法 

分 类 号：TD611.2[矿业工程—矿山机电]