基于Moldflow的洗衣机平衡环叠层注塑模设计及工艺优化  

Design and Process Optimization of Stack Injection Mould for Balance Ring of Washing Machine Based on Moldflow Software

作　　者：马一恒 王小新[1] 刘琴 MA Yiheng;WANG Xiaoxin;LIU Qin(School of Polymer Science and Engineering,Qingdao University of Science and Technology,Qingdao 266042,China;Qingdao Hisense Mould Co,Ltd,Qingdao 266114,China)

机构地区：[1]青岛科技大学高分子科学与工程学院,山东青岛266042 [2]青岛海信模具有限公司,山东青岛266114

出　　处：《中国塑料》2018年第7期132-136,共5页China Plastics

摘　　要：针对洗衣机平衡环的产品特点进行了叠层注塑模设计,使用Moldflow软件对产品进行了充填及保压、翘曲模拟分析。通过模拟熔体充模过程,优化了浇口数量和流道尺寸,达到了流动平衡;通过对不同的保压方案进行保压和翘曲变形分析,确定了合理的保压控制方法和工艺参数。结果表明,该叠层模具能够很好地满足洗衣机平衡环的成型和装配要求。A stack injection mold was designed according to characteristics of the balance ring of washing machine.The Moldflow software was used to simulate the filling,packing and warpage deformation processes of injection-molded parts.Through the simulation of mold filling process,the number of gate and the size of runner were optimized,and the flow balance was achieved.The optimal control method and parameters of packing process were obtained by comparison of the results from the packing and warpage deformation processes with different packing parameters.The results indicated that the molding and assembling requirements for balance ring could be well met by the stack mold designed in this work.

关 键 词：叠层注塑模 MOLDFLOW 模具设计 工艺优化 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业]