引汉济渭秦岭隧洞高磨蚀性硬岩TBM滚刀磨损试验研究  

Experimental Study of Disc Cutter Abrasion of TBM Used in Qinling Tunnel of Hanjiang River-Weihe River Water Conveyance Project with High Abrasive Hard Rock

作　　者：蔡昱[1] 祝和意[1] 杨小玉[1] 委玉奇[1] 夏明 CAI Yu;ZHU Heyi;YANG Xiaoyu;WEI Yuqi;XIA Ming(Shaanxi Railway Institute,Weinan 714099,Shaanxi,China;China Railway Tuunel Stock Co.,Ltd.,Zhengzhou,450001,Henan,China)

机构地区：[1]陕西铁路工程职业技术学院,陕西渭南714099 [2]中铁隧道股份有限公司,河南郑州450001

出　　处：《隧道建设（中英文）》2018年第9期1579-1584,共6页Tunnel Construction

基　　金：陕西省教育厅专项科研课题(17JK0168)

摘　　要：引汉济渭工程秦岭输水隧洞TBM掘进施工在试掘进段因遭遇高磨蚀性硬岩地层,滚刀发生严重磨损,致使施工进度严重滞后。为降低刀具磨损,节约施工成本,加快施工进度,必须对刀具磨损进行准确预测。针对高磨蚀性地层,开展滚刀磨损预测研究;通过课题组前期研究结果,建立滚刀磨损理论预测模型;通过室内实验,建立滚刀磨损实验预测模型;通过现场试验,对室内实验模型及课题组前期研究建立的理论预测模型进行验证。结果表明,实验预测结果具有较高的准确性,相对误差在10%以内。The hard rock formation with high abrasiveness was encountered during TBM boring in test section of Qinling Tunnel of Hanjiang River-Weihe River Water Conveyance Project,as a result,the disc cutters were seriously worn and the construction schedule was seriously delayed.Hence,the cutting tool abrasion should be accurately predicted so as to reduce the cutting tool abrasion and cost and rapid the construction schedule.Firstly,a theoretical prediction model for disc cutter abrasion is established based on previous study results;and then an experimental prediction model for disc cutter abrasion is established by laboratory test;finally,the theoretical prediction model and experimental prediction model are verified by field test.The results show that the experimental prediction model is with a higher accuracy and a relative error within 10%.

关 键 词：秦岭隧洞 高磨蚀性地层 TBM刀具磨损 预测模型 试验研究 

分 类 号：U455.3[建筑科学—桥梁与隧道工程]