检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨广峰[1] 杨帆 杨霆浩 崔静[1] YANG Guangfeng;YANG Fan;YANG Tinghao;CUI Jing
机构地区:[1]中国民航大学机场学院
出 处:《油气田地面工程》2018年第8期9-12,共4页Oil-Gas Field Surface Engineering
基 金:国家自然基金(U1633111;51206179);中央高校基本科研业务费(2000340236;2000340240);中国民航大学科研启动经费(09QD05X)支持
摘 要:工业中常使用一些状态方程来解决纯物质气液相平衡问题,对于预测纯物质饱和气液相密度,方程的模拟计算结果与实验值之间存在偏差。为了获得精确的预测结果,对五种状态方程进行编程,对工业中常见的10种物质的饱和气液相密度进行预测,并与实验值进行比较,做出误差分析。结果表明:预测饱和气相密度,五种方程的模拟计算结果都很准确;对于预测饱和液相密度,BWRS方程和改进后的SRK方程模拟计算精度非常高,因改进后的SRK方程参数少,操作更容易,所以改进后的SRK方程有望在相关领域得到广泛的应用。In industry,some state equations are commonly used to solve gas-liquid phase equilibrium problem of the pure substance.For predicating pure substance saturated gas-liquid phase density,there are some deviations between the simulated calculation results and the experimental values.In order to obtain accurate predicating results,five state equations are programmed to predict the saturated gas-liquid density of ten kinds of common substances in industry is predicted and compared with the experimental values.Then the error analysis is carried out.The results show for predicting saturated gas phase density,simulated results of five equations are very accurate;for predicting saturated liquid,the improved SRK equation and BWRS equation have very high accuracy,and the improved SRK equation is expected to be widely used due to its less parameters and easier operation.
关 键 词:纯物质 气液相平衡 状态方程 误差Doi:10.3969/j.issn.1006-6896.2018.08.003
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200