检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:蒋晓梅[1,2] 阮一晖 JIANG Xiaomei;RUAN Yihui(School of Mechanical Engineering,Changshu Institute of Technology,Changshu Jiangsu 215500 China;Jiangsu Key Laboratory of Elevator Intelligent Safety,Changshu Jiangsu215500 China;Special Equipment Safety Supervision Inspection Institute of Jiangsu in Suzhou,Suzhou Jiangsu 215021,China)
机构地区:[1]常熟理工学院机械学院,江苏常熟215500 [2]江苏省电梯智能安全重点建设实验室,江苏常熟215500 [3]江苏省特种设备安全监督检验研究院苏州分院,江苏苏州215021
出 处:《电子器件》2018年第5期1163-1167,共5页Chinese Journal of Electron Devices
基 金:江苏省高等学校自然科学研究重大项目(17KJA460001)
摘 要:提出了一种新颖的特别适用于太阳能与风能发电电力转换的单级单相升降压变换器,变换器4个功率开关管可以全部采用IGBT,其中二个也可以由可控硅替换,无需其他的任何额外开关。因此该变换器电路在实现高性能的同时降低了变换器电路成本费用。对提出的变换器进行了理论分析和建模,该电路设计理论经过光伏应用实验验证了其可行性和实用性。A new type of single-stage single-phase buck-boost converter is proposed,which is especially suitable for power conversion between solar energy and wind power.The four power switches of the converter can all use IGBT,and two of them can also be replaced by silicon controlled rectifier,without any additional switches.Therefore,the converter circuit can reduce the cost of converter circuit while realizing high performance.The theoretical analysis and modeling of the proposed converter are carried out.The circuit design theory has proved its feasibility and practicability through the photovoltaic application experiment.
关 键 词:变换器 光伏应用 SIMULINK建模 升压降压
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.120