基于彩色CCD的激光熔覆熔池温度闭环控制研究  

Research of close-loop control of molten pool temperature during laser cladding process based on color CCD

作　　者：孙华杰 石世宏[1] 石拓[2] 傅戈雁[1] 陈磊 SUN Huajie;SHI Shihong;SHI Tuo;FU Geyan;CHEN Lei(School of Mechanical and Electric Engineering,Soochow University,Suzhou 215021,China;School of Mechanical Engineering,Xi’an Jiaotong University,Xi’an 710049,China)

机构地区：[1]苏州大学机电工程学院,苏州215021 [2]西安交通大学机械工程学院,西安710049

出　　处：《激光技术》2018年第6期745-750,共6页Laser Technology

基　　金：国家自然科学基金资助项目(51675359)

摘　　要：为了保持激光熔覆过程中熔池温度的相对稳定,采用比色测温与比例-积分-微分(PID)控制策略相结合的方法实现了熔池温度的闭环控制,搭建了一套基于双通道彩色CCD的激光熔覆成形熔池温度在线测控系统。将发射率ε纳入到待定系数K中,建立了灰度比值与K的对应关系,推导出了熔池温度的计算公式。基于Socket通信实现了温度在工控机与机器人控制器之间的信号传递,设计了基于激光功率变化的温度控制器算法。结果表明,此系统能实时准确地测量并控制熔池温度,控制精度在3%以内;将该系统运用于薄壁圆筒堆积成形实验中,能够有效消除激光熔覆成形过程中的温度累积效应;成形件底部与顶部外径仅相差0. 9mm,成形件各处显微组织差异较小,组织致密均匀。该控制方案具有实时性好、成本较低、便于集成应用等优点。In order to maintain the molten pool temperature relatively stable in laser cladding process,close-loop control of molten pool temperature was realized by the combination of colorimetric temperature measurement and proportional-integral-differential(PID)control strategy.A set of on-line measurement and control system for molten pool temperature of laser cladding based on dual-channel color CCD was built.Emissivityεwas incorporated into the undetermined coefficient K,and the corresponding relationship between gray ratio and K was established,and the calculating formula for the temperature of the molten pool was derived.Based on Socket communication,the signal transmission between industrial personal computer and robot controller was realized,and the algorithm of temperature controller based on laser power variation was designed.The experimental results show that,the system can measure and control the temperature of molten pool in real time and accurately,the control accuracy within 3%.The system is applied to thin-walled cylinder stacking forming experiment,which can effectively eliminate the temperature accumulation effect during laser cladding forming process.The difference between the outer diameter of the bottom and top part of the forming part is only 0.9mm.The control scheme has the advantages of good real-time performance,low cost and easy integration.

关 键 词：激光技术 比色测温 熔池温度 闭环控制 

分 类 号：TN247[电子电信—物理电子学]