加工轨迹对薄壁件微结构电解铣削的影响  

Effects of machining paths on machining quality of electrochemical milling of thin-wall microstructures

作　　者：艾海红 张长富[1] 闫正虎 蒋新广 程培勇 贠康 AI Haihong;ZHANG Changfu;YAN Zhenghu;JIANG Xinguang;CHENG Peiyong;YUN Kang(School of Mechanical Engineering,Xi an Technological University,Xi an 710021,CHN)

机构地区：[1]西安工业大学机电工程学院,陕西西安710021

出　　处：《制造技术与机床》2018年第11期128-132,共5页Manufacturing Technology & Machine Tool

基　　金："十二五"兵器预研支撑基金项目(62201070712);陕西省科技厅项目(2014JM2-5072;2014SZS20-Z02;2014SZS20-P06);陕西省教育厅项目(13JS043;17JK0367);陕西省教育厅专项科研计划项目(17JK0367)

摘　　要：为改善难加工材料弹性合金3J21薄壁件微结构的成形加工质量和效率,进行了加工轨迹对薄壁件微结构的电解铣削加工的影响研究。首先利用拷贝式电解加工方法在线制备了阶梯轴式微细工具阴极,然后利用5种不同加工轨迹进行了150μm"150μm微型方孔的微细电解铣削加工对比实验,并优选出了最佳的加工轨迹。研究结果表明,利用"行铣+环铣"的加工轨迹进行微细电解铣削加工时微型方孔的加工质量更好,加工效率较高。In order to improve the machining quality and efficiency of thin-wall microstructures of difficult-to-cut materials elastic alloy 3J21,the effects of machining paths on the micro electrochemical milling of thin-wall microstructures was studied.Firstly,a ladder-type micro cathode was fabricated on-line with copy-type electrochemical machining(ECM).A comparative experiment of micro electrochemical milling of 150μm0x0E?SymboltB@0x0F150μm micro-square hole was carried out using five different machining paths and the optimal machining path was obtained.The research results showed that“row-milling plus ring-milling”is better considering of both machining quality and efficiency.

关 键 词：加工轨迹 微型方孔 微细电解铣削 加工质量 

分 类 号：TG662[金属学及工艺—金属切削加工及机床]