检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张伟朋 孙永福[3] 谌文武[1,2] 宋玉鹏[3] 董立峰[3] 刘晓瑜[3] ZHANG Wei-peng;SUN Yong-fu;CHEN Wen-wu;SONG Yu-peng;DONG Li-feng;LIU Xiao-yu(Key Laboratory of Mechanics on Disaster and Environment in Western China,Ministry of Education of China,Lanzhou 730000,China;School of Civil Engineering and Mechanical,Lanzhou University,Lanzhou 730000,China;The First Institute of Oceanography,SOA,Qingdao 266061,China)
机构地区:[1]西部灾害与环境力学教育部重点实验室,甘肃兰州730000 [2]兰州大学土木工程与力学学院,甘肃兰州730000 [3]国家海洋局第一海洋研究所,山东青岛266000
出 处:《海洋科学进展》2018年第4期605-613,共9页Advances in Marine Science
基 金:国家重点基础研究发展规划项目--黄土重大灾害及灾害链的发生;演化机制与防控理论(2014CB744701);青岛海洋科学与技术国家实验室鳌山科技创新计划项目--海底地质灾害监测预警与评估关键技术研究(2015ASKJ03);国家重点研发计划项目--水合物形成与分解过程微观结构与宏观力学特性研究(2017YFC0307305)
摘 要:以4处渤海海岸带黄土SEM图像为研究对象,以宏观孔隙比作为分割阈值选取的主要参考标准,基于颗粒/孔隙及裂隙分析系统(Particle/Pore and Crack Analysis System,PCAS)对海岸带黄土SEM图像进行颗粒与孔隙的划分,分别获取了颗粒及孔隙的长度、宽度、等效直径、排列方向、形状系数、周长、面积等一系列微结构参数,完成了海岸带黄土微结构的定量化研究;根据研究结果,以等效半径作为主要参考,提出了一种获取粒径或孔径小于75μm的颗粒或孔隙的分布曲线的方法,可得到与密度计法及压汞法试验结果相似性较高的累计曲线,其结果可作为密度计法及压汞法试验的补充研究方法。This work studied on the scanning electron microscope(SEM)images of coastal loess,with the macroscopic porosity ratio as the main reference standard for selecting segmentation threshold.Based on the Particle/Pore and Crack Analysis System(PCAS)system,SEM images of four coastal loess can be segmented into particles and pores,and the microstructure parameter(e.g.,length,width,equivalent diameter,direction,form factor,perimeter and area)can also be obtained.Based on quantitative results mentioned above,we proposed a method to obtain a similar curve of particle or pore distribution to the densitometer and MIP test.The result could be used as a supplementary to MIP.This study provided a new approach to study the pore distribution in the absence of MIP device.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28