检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:向明 王德伦[1] 吴南星 XIANG Ming;WANG Delun;WU Nanxing(School of Mechanical Engineering,Dalian University of Technology,Dalian 116024,China;School of Mechanical and Electrical Engineering,Jingdezhen Ceramic Institute,Jingdezhen 333001,China)
机构地区:[1]大连理工大学机械工程学院,辽宁大连116024 [2]景德镇陶瓷大学机械电子工程学院,江西景德镇333001
出 处:《大连理工大学学报》2018年第6期564-572,共9页Journal of Dalian University of Technology
基 金:国家科技支撑计划资助项目(2014BAF12B05)
摘 要:用通断特征矩阵表达混联液压系统初始设计要求进而形成阀体单元的知识表达模型,通过通断特征矩阵的分解与匹配操作来完成方向控制阀的概念设计.方向控制阀是混联液压系统液流控制的基本单元,通过实际模型中方向控制阀的通断特征建立基本单元库,并制定出特征矩阵串、并、混联运算规则.遵循特征矩阵的串、并、混联运算规则,初始矩阵被分为一系列子矩阵,通过子矩阵与单元库基本元素匹配完成液压系统方向控制阀的选型,将所有阀体组合可完成液压系统设计.整个特征矩阵分解与匹配过程便于编程实现,为混联液压系统计算机辅助设计提供了一种知识表达模型与运算方法,并通过实例验证了该方法的有效性和可行性.The switch characterization matrix is used to express the initial design requirements of hybrid hydraulic system and develop the knowledge representation model of units of valves,then the conceptual design of the directional control valves is deduced by the decomposition and matching of the switch characterization matrix.The directional control valves are the minimum unit for flow control of hybrid hydraulic system.The basic unit library is obtained by switch characterization of directional control valves in practical model,then the serial,parallel and hybrid rules of characterization matrices are defined.According to these rules,the initial matrix can be decomposed into a serial of sub-matrices,and the type selection design of the directional control valves is obtained by matching the sub-matrices with the element in unit library.Therefore,the design of hydraulic system can be achieved by assembling those valves.The decomposition and matching of characterization matrix can be programmed.It provides a knowledge representation model and operation method for computer aided design of hybrid hydraulic system.The feasibility and availability of the proposed method are testified by example.
关 键 词:概念设计 选型设计 知识表达 特征单元 液压系统
分 类 号:TN911.7[电子电信—通信与信息系统]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222