基于FRANC3D的采煤机行走轮齿根裂纹扩展特性研究  

Research on Crack Propagation Characteristics of Sprocket Root for Shearer Walking Wheel Based on FRANC3D

作　　者：贠瑞光[1] YUN Ruiguang(Shanhai Branch, Tiandi Science & Technology Co. , Ltd. , Shanghai 200030, China)

机构地区：[1]天地科技股份有限公司上海分公司,上海200030

出　　处：《煤矿机电》2018年第6期8-10,13,共4页Colliery Mechanical & Electrical Technology

摘　　要：运用裂纹分析软件FRANC3D对采煤机行走轮齿根裂纹前缘应力强度因子进行数值求解,对齿根裂纹扩展路径进行模拟,并将仿真结果与实际相结合,验证FRANC3D软件仿真分析的有效性。通过实验方法测定行走轮材料的断裂韧性K_(IC),结合FRANC3D软件估算裂纹失稳扩展的最小尺寸,为裂纹扩展特性的研究提供了一种可行的分析方法。The crack stress analysis software FRANC3D has been used to solve the numerical calculation of stress intensity factor of the front edge on the crack propagation of sprocket tooth root for shearer walking wheel,the crack propagation route of the tooth root has been simulated,the validity of FRANC3D software simulation analysis has been verified by combining simulation results with practice. The fracture toughness KIC of the wheel material has been determined by experimental method,the minimum size of crack propagation has been estimated by FRANC3D software,which provided a feasible analysis method for the study of crack propagation characteristics.

关 键 词：行走轮 应力强度因子 裂纹扩展路径 断裂韧性 

分 类 号：TD421.6.1[矿业工程—矿山机电]