薄板平面分段流水线多工位协同的计划管控  

Planning Control of Multi-Station Coordination in Sheet Metal Panel Block Assembly Line

作　　者：梅先志 姚飚[2] 马晓平[2] 陈春才 姜伟 MEI Xianzhi;YAO Biao;MA Xiaoping;CHEN Chuncai;JIANG Wei(China Merchants Heavy Industry(Jiangsu)Co.,Ltd.,Nantong 226100,Jiangsu,China;Jiangsu Modern Shipbuilding Technology Co.,Ltd.,Zhenjiang 212003,Jiangsu,China)

机构地区：[1]招商局重工(江苏)有限公司,江苏南通226100 [2]江苏现代造船技术有限公司,江苏镇江212003

出　　处：《造船技术》2018年第6期77-82,共6页

摘　　要：基于豪华邮船建造中的薄板平面分段流水线,分析流水线工艺流程,确定流水线生产节拍,配置工位之间的缓冲区,制定流水线计划的标准作业周期,提出流水线计划管控的基本流程和方法,为实现流水线按既定节拍连续、均衡生产创造有利条件。Based on the sheet metal panel block assembly line in the production of luxury cruise,the process flow of the assembly line is analyzed,the takt time of this line is determined,the buffer zone between workstations is configured,the standard operation cycle of the line is formulated,and the basic flow and method of the planning control of the line are proposed,which all create advantages to realize the production of the line according to the established takt time continuously and evenly.

关 键 词：平面分段 流水线 生产节拍 计划管控 

分 类 号：U673.2[交通运输工程—船舶及航道工程]