立式螺旋管汽水两相流动沸腾干涸点试验研究  

Experimental Study on Dryout Point of Steam-water Flow in Vertical Helical Coils

作　　者：陈俨 景益 巢孟科 王明路 顾汉洋[2] CHEN Yan;JING Yi;JING Yi;WANG Ming-lu;GU Han-yang(Shanghai Nuclear Engineering Research and Design Institute Ltd. ,Shanghai 200233,China;School of Nuclear Science and Engineering,Shanghai Jiaotong University,Shanghai 200400,China)

机构地区：[1]上海核工程研究设计院有限公司,上海200233 [2]上海交通大学核科学与工程学院,上海200400

出　　处：《压力容器》2018年第11期10-15,共6页Pressure Vessel Technology

摘　　要：为研究螺旋管内汽水两相流干涸特性,在较宽的流动参数范围内(系统压力P=2～7 MPa,质量流速G=150～700 kg/(m^2·s),热流密度q=75～350 k W/m^2)对一立式螺旋管(内径15. 26 mm,螺旋直径350 mm,螺旋升角10°)进行了试验,分析了管内流动沸腾传热系数和壁面温度的变化特征,获得了压力、质量流速、热流密度3个流动参数对临界干度的影响规律,并将现有文献中的临界干度预测关系式与试验结果进行了对比,推荐了适用于该工况范围的关系式。In order to study the dryout characteristics of steam-water flow in a vertical helically coiled tube with inner diameter of15.26mm,coil diameter of350mm and helix angle of10,experiments were performed on the tube at a system pressure of2~7MPa,mass velocity of150~700kg/(m^2·s)and wall heat flux of75~350kW/m^2.The boiling heat transfer coefficient of flow in the tube and change characteristics of wall surface temperature were analyzed,and the influence rules of three flow parameters,namely,system pressure,mass velocity and wall heat flux,on the critical quality were obtained.Several available dryout correlations in existing literature were compared with experimental results,and the correlation applicable to the range of operating conditions in this paper was recommended.

关 键 词：螺旋管 汽水两相流 干涸点 临界干度 

分 类 号：TH49[机械工程—机械制造及自动化] TK222[动力工程及工程热物理—动力机械及工程]