物联网通信传输设备多频段信号源远程切换控制技术  

Remote Switching Control Technology of Multi-band Signal Source in Internet of Things Communication Transmission Equipment

作　　者：邢鹏康[1] 杨文铂[1] Xing Pengkang;Yang Wenbo(Electronic Information Engineering College, Henan Polytechnic Institute, Nanyang 473000,China)

机构地区：[1]河南工业职业技术学院电子信息工程学院,河南南阳473000

出　　处：《计算机测量与控制》2018年第12期101-104,共4页Computer Measurement &Control

基　　金：河南省科技厅科技攻关项目(162102310362)

摘　　要：传统物联网通信传输设备信号源切换控制中,受丢包问题的影响,易导致切换控制误差大的问题,提出基于节点监控的多频段信号源远程切换控制技术;通过分析物联网通信传输设备,提出信号控制框架,对设备多频段信号源切换节点进行监控;依据节点监控结果,发现多频段信号源远程切换中的问题节点,通过设定动态阈值,确定问题信号节点所在具体位置;通过动态控制机制和丢包计算公式为依据,解决丢包问题造成的信号源切换控制误差大的问题;采用Netflow数据交换方式,实现对定位节点处信号源远程切换的控制;实验结果表明,该方法比传统方法控制误差小0.71,可提高信号源远程切换控制效果。In the traditional switching control of the signal source of the communication transmission equipment in the Internet of things,the problem of the large error of switching control is easy to be caused by the problem of packet loss.A multi-band remote switching control technology based on node monitoring is proposed.By analyzing the communication transmission equipment of the Internet of things,a signal control framework is proposed to monitor the switching node of the multi-band signal source of the device.According to the monitoring results of the nodes,the problem nodes in the multi-frequency signal source remote switching are found,and the location of the problem signal nodes is determined by setting the dynamic threshold.On the basis of dynamic control mechanism and packet loss calculation formula,the problem of large control error caused by packet loss is solved.Title Netflow data exchange method is used to control the remote switching of the signal source at the location node.The experimental results show that the control error of this method is0.71less than that of the traditional method,and the control effect of remote switching of signal source can be improved.

关 键 词：物联网 通信设备 多频段信号源 控制 丢包 节点 

分 类 号：TP391.44[自动化与计算机技术—计算机应用技术]