Optimization experiment on eccentric lapping of cylindrical rollers  

作　　者：Jia Su Julong Yuan Sen Zhang Binghai Lv 

机构地区：[1]Ultra-Precision Machining Research Centre,Zhejiang University of Technology

出　　处：《Nanotechnology and Precision Engineering》2018年第3期197-204,共8页纳米技术与精密工程（英文）

基　　金：supported by National Natural Science Foundation of China (Grant No.51175468,U1401247);Public Welfare Industry Project of Zhejiang Provincial Science and Technology Department (Grant no.20160069)

摘　　要：Cylindrical rollers are important elements of bearings,and their machining accuracy and consistency affect the bearing quality.Using a GCr15 cylindrical roller ofФ11×12 as the processing object in this study,the effects of loading pressure,abrasive concentration,and speed combination on cylindrical roller machining precision were investigated using the orthogonal experimental design method on a double-side eccentric pendulum lapping and polishing machine.The machining parameters of the lapping stage were optimized,and the lapping optimal process parameters were determined by S/N response analysis and analysis of variance(ANOVA).The results show that when the experiment was optimized using loading pressure of 10 N/roller,abrasive concentrationof 20.0 wt%,and rotational speed combination,the material removal rate(MRR)of cylindrical roller reached 0.0896μm/min;the average roughness of the batch decreased from 0.056μm to 0.027μm,51.8%lower than the original batch average roughness,and the deviation decreased from the initial 0.022μm to 0.014μm;the batch average roundness error decreased from 0.47μm to 0.28μm,40.4%lower than the original batch average roundness error,and the deviation decreased from the initial 0.19μm to 0.038μm;and the batch average diameter variation decreased from 4.5μm to about 3.6μm,20%lower than the original batch average diameter variation.The double-side eccentric lapping of cylinder rollers does not only lead to improvement in the surface quality and shape accuracy of rollers,but also improvement in the batch consistency.Cylindrical rollers are important elements of bearings,and their machining accuracy and consistency affect the bearing quality.Using a GCr15 cylindrical roller ofФ11×12 as the processing object in this study,the effects of loading pressure,abrasive concentration,and speed combination on cylindrical roller machining precision were investigated using the orthogonal experimental design method on a double-side eccentric pendulum lapping and polishing machine.The machining parameters of the lapping stage were optimized,and the lapping optimal process parameters were determined by S/N response analysis and analysis of variance(ANOVA).The results show that when the experiment was optimized using loading pressure of 10 N/roller,abrasive concentrationof 20.0 wt%,and rotational speed combination,the material removal rate(MRR)of cylindrical roller reached 0.0896μm/min;the average roughness of the batch decreased from 0.056μm to 0.027μm,51.8%lower than the original batch average roughness,and the deviation decreased from the initial 0.022μm to 0.014μm;the batch average roundness error decreased from 0.47μm to 0.28μm,40.4%lower than the original batch average roundness error,and the deviation decreased from the initial 0.19μm to 0.038μm;and the batch average diameter variation decreased from 4.5μm to about 3.6μm,20%lower than the original batch average diameter variation.The double-side eccentric lapping of cylinder rollers does not only lead to improvement in the surface quality and shape accuracy of rollers,but also improvement in the batch consistency.

关 键 词：Cylindrical ROLLER ECCENTRIC PENDULUM type Orthogonal EXPERIMENT LAPPING BATCH consistency 

分 类 号：O3[理学—力学]