溶剂抽提-选择性加氢脱硫组合技术的开发及工业应用  

DEVELOPMENT AND INDUSTRIAL APPLICATION OF SOLVENT EXTRACTION-SELECTIVE HYDRODESULFURIZATION COMBINATION TECHNOLOGY

作　　者：张登前[1] 唐文成[1] 习远兵[1] 褚阳[1] 潘光成[1] 戴立顺[1] 李明丰[1] Zhang Dengqian;Tang Wencheng;Xi Yuanbing;Chu Yang;Pan Guangcheng;Dai Lishun;Li Mingfeng(SINOPEC Research Institute of Petroleum Processing,Beijing 100083)

机构地区：[1]中国石化石油化工科学研究院,北京100083

出　　处：《石油炼制与化工》2019年第1期37-41,共5页Petroleum Processing and Petrochemicals

基　　金：国家重点研发计划资助项目(2017YFB0306504)

摘　　要：针对以硫含量和烯烃含量高、芳烃含量低的催化裂化汽油为原料加氢脱硫生产满足车用汽油(Ⅴ)标准的汽油(简称国Ⅴ标准汽油)时辛烷值损失偏大的问题,开发了催化裂化汽油溶剂抽提-选择性加氢脱硫组合技术(简称RCDS技术)。中试结果表明,采用RCDS技术处理具有上述特点的催化裂化汽油生产国Ⅴ标准汽油时的RON损失比单独采用选择性加氢脱硫技术时减少0.9～1.9个单位。工业应用结果表明,采用RCDS技术处理硫质量分数为418～460μg/g、烯烃体积分数为27.6%～27.9%、芳烃体积分数为19.2%～19.3%的催化裂化汽油,当产品硫质量分数降低至7μg/g时,汽油RON损失仅为1.0～1.3个单位,且装置汽油收率高达99.9%。Aiming at the problem of large RON loss in the production of nationalⅤstandard gasoline from the catalytic cracking gasoline feed with high sulfur,high olefin content and low aromatic content,a combined technology(RCDS)of solvent extraction and selective hydrodesulfurization was developed.The results of the pilot test showed that the RON loss of RCDS technology is 0.9-1.9units less than that of the selective hydrodesulfurization technology alone when producing nationalⅤstandard gasoline using above feed.Industrial application results showed that using catalytic cracking gasoline as feed with sulfur mass fraction of 418-460μg/g,olefin volume fraction of 27.6%-27.9%,and aromatic volume fraction of 19.2%-19.3%,when the sulfur mass fraction of product is reduced to 7μg/g,the RON loss is only 1.0-1.3units,and the gasoline(C5+)yield is as high as99.9%.

关 键 词：催化裂化汽油 选择性加氢脱硫 溶剂抽提 组合工艺 

分 类 号：TE624.55[石油与天然气工程—油气加工工程]