检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:林悦香[1] 尚书旗[1] 王东伟[1] 宋来其 张敬国 Lin Yuexiang;Shang Shuqi;Wang Dongwei;Song Laiqi;Zhang Jingguo(College of Mechanical and Electrical Engineering,Qingdao Agricultural University,Qingdao 266109,China;College of Mechanical and Electronic Engineering,Shandong Agricultural University,Tai'an 271018,China;Gaomi Secondary Specialized School,Gaomi 261501,China)
机构地区:[1]青岛农业大学机电工程学院,青岛266109 [2]山东农业大学机械电子工程学院,泰安271018 [3]潍坊市高密中等专业学校,高密261501
出 处:《农业工程学报》2019年第1期23-30,共8页Transactions of the Chinese Society of Agricultural Engineering
基 金:山东省农机装备研发创新计划项目"苹果生产全程机械化技术与装备研发(2017YF006)"
摘 要:针对现有果树栽植劳动强度大、株距控制精度低的现状,该文开展了基于标准化栽培模式的农机农艺融合技术研究,设计了矮砧密植苹果栽植机,解决了果树幼苗栽植作业中存在的机械化关键技术难题:连续宽深开沟、果苗直立栽植、株距精确控制。采用V型双圆盘开沟器实现连续宽深开沟;通过人工辅助喂苗、栅杆定位装置辅助定位、夹持输送装置扶苗、刮板式覆土器回土及橡胶镇压轮压实土壤等系列环节,完成果苗直立栽植;定距栽植控制装置通过光电传感器感应前一棵树苗位置后启动下一棵树苗夹持运行并完成栽植,实现了株距的精确控制。该机开沟深度为0~40 cm可调,开沟宽度为30~37 cm,作业速度为0.8~1.5 km/h。田间试验结果表明:该机工作稳定,栽植效果良好,平均栽植合格率为93.79%,平均栽植深度合格率为91.43%,平均株距变异系数为5.03%,栽植效率720株/h,是人工栽植效率的36倍,满足现代标准果园机械化生产要求。种植环节机械化的实现,可为后续管理环节及收获环节的机械化提供可行性保障。Aiming at the present situation of high labor intensity and low precision of plant spacing control in fruit tree planting,the agricultural machinery agronomic integration technology based on standardized cultivation mode was studied in this paper,and an apple planting machine for high density dwarfing orchard was designed,the key technical problems in mechanized planting of fruit seedlings,such as continuous wide and deep furrow opening,vertical planting of fruit seedlings and precise control of plant spacing,were solved.The apple planting machine for high density dwarfing orchard was powered by a tractor above 58 kW and used a rear three-point suspension operation mode.The structure mainly composed of continuous ditching device,clamping and conveying device,fixed-distance planting device,overburden pressing device and other auxiliary devices.The ditching device was powered by power-output shaft to drive opener ditching continuously.V-type double-disc opener was used,ditching blade was installed on ditch cutter supported by inclined bearings.Soil retaining plate was installed at the rear of the opener,front and side plates were used with the opener to ensure the grooving structure was stable.Bottom plate was used together with grid bar to assist positioning.By manually placing the seedlings and placing the rotes on the bottom plate,the tree trunk was placed obliquely on the grid bar lying on the conveying channel for initial positioning.After the sensor of the fixed-distance planting device installed at the rear of the frame detected the position information of the planted seedlings,the cylinder action of the clamping conveyor was started by controlling the switch.the positioning bar was opened,and the seedlings entered the clamping state,and then the seedlings were transmitted backward by the carrying belt.The carrying belt was powered by the ground wheel with the same rate,therefore,the speed of the carrying belt was the same as the machine working speed,and the seedlings were placed in the planting ditch stati
关 键 词:农业机械 设计 苹果 定距栽植 连续开沟 栅杆辅助定位
分 类 号:S233.2[农业科学—农业机械化工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145