检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李向阳[1] 王浩亮 冯鑫[1] 陈杰[1] 毛在砂[1] 李国征 杨超[1,2] LI Xiangyang;WANG Haoliang;FENG Xin;CHEN Jie;MAO Zaisha;LI Guozheng;YANG Chao(CAS Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences,Beijing 100190;School of Chemical Engineering, University of Chinese Academy of Sciences, Beijing 100049)
机构地区:[1]中国科学院过程工程研究所中国科学院绿色过程与工程重点实验室,北京100190 [2]中国科学院大学化学工程学院,北京100049
出 处:《化工进展》2019年第1期45-71,共27页Chemical Industry and Engineering Progress
基 金:国家重点研发计划(2016YFB0301701);国家自然科学基金(21427814;21878297;91534117);中国科学院前沿科学重点研究项目(QYZDJ-SSW-JSC030);中国科学院科研装备研制项目(YZ201641);恩泽生物质精细化工北京市重点实验室开放课题项目
摘 要:为了增大传质和传热面积,多相反应器中分散相通常以颗粒形式(气泡、液滴或固体颗粒)分散、运动于连续相流体中,与周围的连续相及其他分散相颗粒的相互作用使颗粒和颗粒群呈现复杂的时空非均相行为。多相反应器中非均相特性的准确描述是发展准确的反应器模型、进行定量诊断分析和优化设计高效反应器的必要基础。本文总结了多相反应器中颗粒和颗粒群的复杂时空行为,提出了当前多相反应器非均相特性测量正面临的在线测量、高分散相浓度和多分散相等主要难题;综述了多相反应器测量技术研究的进展,指出了PC和PV等光纤测量技术是较经济的高浓度两相反应器的在线测量技术,而侵入式照相法测量结果更准确,具备解决上述测量难题方面的可行性,具备较好的应用前景,但要实现工业在线测量仍存在一些高难度的技术问题需要解决。In order to increase the mass/heat transfer area,the dispersed phases in multiphase reactors are usually dispersed into the continuous phase fluid in the form of particles(bubbles,droplets or solid particles).The interactions with the surrounding continuous phase and other dispersed phase particles make the particles and particle swarms present the complex temporal and spatial heterogeneous behaviors.It is the essential basis to describe accurately these heterogeneous characteristics for modeling accurately,diagnosing quantitatively and optimizing multiphase reactors.In this work,the complex temporal and spatial heterogeneous behaviors of particles and particle swarms in multiphase reactors are summarized and three main measurement problems,i.e.,on-line,dense dispersed phase and multidispersed phase measurements are put forward in multiphase reactors.The progresses in the measurement techniques of multiphase reactors are summarized.It is pointed out that the optical fiber measurement techniques such as PC and PV probes are more economical for on-line measurement of the dense twophase reactors,while the invasive photography technology is more accurate.It provides the feasibility to solve the above measurement problems and has a good applicable prospect.However,there are still some technical problems to be solved in order to realize the industrial on-line heterogeneous measurement of multiphase reactors.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3