高速干切滚齿工艺切屑形变规律及其对刀具的损伤行为  

Contribution of Chip Deformations and Crushes to Tool Failures in High-speed Dry Gear Hobbing

作　　者：李本杰 曹华军[1] 杨潇[1] 周进 LI Benjie;CAO Huajun;YANG Xiao;ZHOU Jin(State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing,400044)

机构地区：[1]重庆大学机械传动国家重点实验室,重庆400044

出　　处：《中国机械工程》2019年第1期71-78,共8页China Mechanical Engineering

基　　金：国家自然科学基金资助项目(51475058)

摘　　要：针对高速干切滚齿过程中切屑的形变规律及切屑挤压行为,基于DEFORM-3D建立了高速干切滚齿工艺仿真实验模型,通过对不同工艺参数下高速干切滚齿工艺实验仿真,实现了高速干切滚齿过程中齿轮材料去除过程的可视化,获得了高速干切滚齿过程中切屑的形变规律以及干切滚刀的磨损状态。结合实际高速干切滚齿加工实验,对比切屑形貌及干切滚刀损伤情况,进一步验证了切屑在生成及流动过程中的形变规律以及切屑对干切滚刀的挤压损伤行为。研究结果可为高速干切滚齿工艺参数优化以及高速干切滚刀的寿命延长和性能控制提供参考。In allusion to the chip deformations and chip crushes in high-speed dry gear hobbing,a simulation model of high-speed dry gear hobbing was built based on DEFORM-3D herein.Through the simulation of high-speed dry gear hobbing under different process parameters,the visualization of material removal processes in high-speed dry gear hobbing was achieved,and the mechanism of chip deformations and the tool wear conditions of dry hobs were obtained.Combined with experiments,the simulation results were further validated by comparing the chip geometry and tool damage types obtained from simulation and experiments respectively.This study may provide a reference for parameter optimizations and tool life extension in high-speed dry gear hobbing.

关 键 词：高速干切滚齿 切屑形变 切屑挤压 刀具损伤 

分 类 号：TG61[金属学及工艺—金属切削加工及机床]