准双曲面齿轮热处理畸变及接触区影响研究  

Study on Heat Treatment Distortion of Hypoid Gear and Contact Zone Influence

作　　者：周廷美[1] 刘杰 莫易敏[1] 谢冲[1] 梁耀航 Zhou Tingmei;Liu Jie;Mo Yimin;Xie Chong;Liang Yaohang(School of Mechanical and Electrical Engineering,Wuhan University of Technology,Wuhan 430000,China;Liuzhou Wuling Automobile Industry Co.,Ltd.,Liuzhou 545000,China)

机构地区：[1]武汉理工大学机电工程学院,湖北武汉430000 [2]柳州五菱汽车工业有限公司,广西柳州545000

出　　处：《机械传动》2019年第1期31-34,共4页Journal of Mechanical Transmission

摘　　要：准双曲面齿轮作为主减速器的重要零部件之一,其齿廓的畸变程度直接影响着齿面误差和齿轮接触区质量及一致性的好坏。针对齿轮热处理变形不受控的问题,研究了齿轮热处理的畸变机理。应用45点拓扑网格误差分析接触区偏移规律,以专用锥齿轮检测设备Gleason GMM350和600HTT滚检机为载体,通过实验对比齿轮热处理前后齿面精度变化和接触印痕偏移规律,验证了接触区偏移理论分析结果的正确性,且实验表明,齿轮热处理接触区从大端稍偏齿顶位置向齿面中间移动。Hypoid gear is one of the important parts of the main reducer,its degree of tooth profile distortion directly affects the tooth surface error and the quality and consistency of the gear contact area.In order to solve the problem of uncontrolled heat treatment of gears,the distortion mechanism of gear heat treatment is studied.The 45-point topology grid error is used to analyze the law of contact zone offset.Using the special bevel gear detection equipment Gleason GMM350 and 600HTT roller inspection machine as the carrier,by comparing the variation of the tooth surface accuracy and the offset of the contact mark before and after the heat treatment of the gear,the correctness of the theoretical analysis result of the contact zone shift is verified.The correctness of the contact zone offset theory,and experiments show that the gear heat treatment contact zone moves from the large end slightly to the tooth tip position to the middle of the tooth face.

关 键 词：准双曲面齿轮 畸变机理 接触偏移 齿面精度 

分 类 号：TG162.73[金属学及工艺—热处理]