检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:徐强[1,2] 郑山锁[2] 樊禹江[3] XU Qiang;ZHENG Shansuo;FAN Yujiang(Geological Engineering and Surveying Engineering College,Chang′an University,Xi′an 710054,China;School of Civil Engineering,Xi′an University of Architecture and Technology,Xi′an 710055,China;School of Architecture,Chang′an University,Xi′an 710061,China)
机构地区:[1]长安大学地质工程与测绘工程学院,陕西西安710054 [2]西安建筑科技大学土木工程学院,陕西西安710055 [3]长安大学建筑学院,陕西西安710061
出 处:《哈尔滨工程大学学报》2019年第2期292-297,共6页Journal of Harbin Engineering University
基 金:国家科技支撑计划(2013BAJ08B03);国家自然科学基金项目(41272284; 41807243)
摘 要:结构临近倒塌状态时,构件不可避免发生较大变形。节点区梁柱焊接处是钢框架结构薄弱环节,易发生脆性破坏,本文设计了3个不同的大位移加载制度对钢框架节点构件进行低周往复加载,考察其破坏过程与特征,研究了不同大位移加载方式对钢框架节点的荷载-位移滞回曲线、滞回耗能、损伤演化等力学性能的影响。结果表明:加载制度对构件的破坏形态起控制作用,变幅加载与等幅60 mm循环加载下试件为脆性破坏,等幅90 mm循环加载下试件为延性破坏。钢框架节点梁端作为结构抗震耗能的关键部位,将耗能能力作为评价其抗震性能的指标,建立起简单通用的累积破坏损伤模型,该损伤模型易于评价节点在地震作用下的损伤程度。When a structure is close to collapse state,its structural members inevitably exhibit large deformation.In a steel frame structure,the welding of beam and column in the joint area is the weak link that is prone to brittle failure.In this study,three different large displacement loading systems are designed for low-cycle reciprocating loading of steel frame joints,and the failure process and characteristics are investigated.The effects of different large displacement loading methods on the load-displacement hysteresis curve,hysteretic energy dissipation,damage evolution,and other mechanical properties of steel frame joints are studied.Results show that the loading system plays a controlling role in the failure modes of the members.The specimen under variable amplitude loading and equal amplitude 60 mm cyclic loading shows brittle failure,while the specimen under equal amplitude 90 mm cyclic loading shows ductile failure.The energy dissipation capacity was taken as the index to evaluate the seismic performance of the joints,the beam end of which was the key part of seismic energy dissipation of the structure.A simple and general cumulative damage model was established,which was easy to evaluate the damage degree of the joints under earthquake.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117