油菜联合收割机双向电驱动分行竖割刀设计  

Design of bidirectional electric driven side vertical cutter for rape combine harvester

作　　者：关卓怀 吴崇友 王刚 李海同 沐森林 Guan Zhuohuai;Wu Chongyou;Wang Gang;Li Haitong;Mu Senlin(Nanjing Research Institute for Agricultural Mechanization,Ministry of Agriculture,Nanjing 210014,China)

机构地区：[1]农业农村部南京农业机械化研究所,南京210014

出　　处：《农业工程学报》2019年第3期1-8,共8页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家重点研发计划项目(2016YFD0702101);中国农业科学院基本科研业务费专项(S201821);国家油菜产业体系专项资助项目(CARS-13-10B)

摘　　要：针对传统油菜联合收割机分行竖割刀存在振动大、损失率高的问题,该文设计了双向电驱动分行竖割刀装置。根据对称式双偏心轮的运动学特征和双动刀片切割油菜茎秆的力学模型,确定了传动机构和刀片的主要参数;建立了动刀切割运动轨迹方程,通过数值模拟分析不同切割速比(割刀平均速度与收割机前进速度之比)下的切割效果,以未切割率与重复切割率之和最小为约束条件,确定切割速比为1.1时切割效果最优;将双向电驱动分行竖割刀应用于4LZ-6T型油菜联合收割机并开展振动测试,仅竖割刀工作时,割台振动加速度为0.11g,为横割刀振动加速度的11%;田间试验表明,装有双向电驱动分行竖割刀的油菜联合收割机收获总损失率为6.15%,其中割台损失率为3.37%,竖割刀分行平均损失率为1.03%;在切割速比为1.08、1.63、2.40时,竖割刀的分行损失率分别为0.90%、1.04%和1.14%,在接近最优切割速比1.1时,竖割刀分行损失率最小为0.90%,相较另外2种切割速比,竖割刀分行损失率分别减小了13.5%和26.7%。该研究和设计可为油菜割台结构改进和降低油菜联合收割机收获损失提供参考。The side vertical cutter of the rape combine harvester header is generally composed of a moving blade and a fixed blade which were driven by mechanical structure.This kind of cutting form and transmission structure result in high loss and strong working vibration of the rape combine harvester header.In response to the above problems,bidirectional electric driven side vertical cutter was designed.Bidirectional electric driven side vertical cutter mainly includes driving mechanism and 2 blades.The driving mechanism was composed of motor,a pair of driving gears,symmetric double eccentric wheel and 2 cranks.Symmetric double eccentric wheel mechanism was used as transmission mechanism and its kinematic characteristics were analyzed.The displacement,velocity and acceleration curves of the 2 blades had the same shape,but the phase difference wasπ,and the acceleration inertial forces cancel each other out,which could reduce the influence on the vibration of the header.According to the mechanical model of blade cutting rape stem,main parameters of the transmission mechanism and the blade were determined.The mechanical model of side vertical cutter cutting rapeseed stem was established.According to the mechanical condition that rape stem was clamped by blades but does not slide,the blade slip angle was determined to be 19°.Double action cutters cutting trajectory equations were established.Based on numerical simulation,the cutting effects under different cutting speed ratios(the ratio of the average speed of the cutter to the forward speed of the harvester)were compared.The relationships between missing rate,repeated rate and cutting speed ratio were fitted.Take the minimum of missing rate and repeated rate as constraint,the optimum cutting speed ratio was determined to be 1.1.Bidirectional electric driven side vertical cutter was applied to 4LZ-6T rapeseed combine harvester.Header vibration test showed that header vibration acceleration was 0.11g when only the side vertical cutter working.When the cross cutter and side

关 键 词：机械化 收获 设计 油菜联合收割机 竖割刀 切割轨迹 振动 

分 类 号：S225.31[农业科学—农业机械化工程]