4HBL-2C型半喂入花生联合收获机设计与试验  

Design and Test of Half-feed Peanut Combine Harvester

作　　者：胡文泽 何珂[1] 于兴瑞 耿端阳[1] 李政平 张守海 Hu Wenze;He Ke;Yu Xingrui;Geng Duanyang;Li Zhengping;Zhang Shouhai(School of Agricultural Engineer and Food Science, Shandong University of Technology, Zibo 255000,China;Agricultural Equipment Research Institute of Shandong Wuzheng Group, Rizhao 276825,China)

机构地区：[1]山东理工大学农业工程与食品科学学院,山东淄博255000 [2]山东五征集团有限公司,山东日照276800

出　　处：《农机化研究》2019年第4期58-63,共6页Journal of Agricultural Mechanization Research

基　　金：国家重点研发计划项目(2016YFD0702100)

摘　　要：花生是我国四大油料作物之一,常年种植面积466.7万hm^2左右,总产量1 700万t,约占全球40%,居全球首位。然而,我国花生生产机械化发展却相较滞后,目前花生收获作业仍主要靠人工完成。据农业部农机化司统计,目前我国花生收获机械化率约为33%,花生收获机械化水平仍有较大提升空间。为此,依据前期研究成果并参照国内外相关机型,优化设计了4HBL-2C型半喂入花生联合收获机,并对花生收获机主要部件进行了设计参数分析,最后对样机进行了田间试验,结果表明:2HBL-2C型半喂入花生联合收获机收获损失率与果荚含杂率均符合国家标准技术要求,可为花生联合收获提供可供选择的机型。Peanut is one of the most important oil crops and protein resources in China. Over the past years, peanut production and planting area have been respectively ranked first and second in the world. However, compared with other country, the mechanization of peanut production in China has lagged behind. At present, the harvesting is still mainly done by manpower, which has become the main bottleneck of industrial development. On the basis of the previous research results and referring to the related models at home and abroad, the author designed of 2HBL-2C type half-feed peanut combine harvester and the peanut harvester cleaning device was optimized. We used the cleaning wheel and the cleaning tube to clear the soil and other major parts of the design parameter were also analysised. Finally, we carried on the field experiments, the test results show that the soil loss rate and pod rate of the 2HBL-2C type half-feed peanut combine harvester are satisfied with the requirements of the national standard technology, the harvester provides an alternative model for peanut harvesting.

关 键 词：花生 收获机 半喂入 

分 类 号：S225.73[农业科学—农业机械化工程]