支持多种传输模式的双通路串行RapidIO设计与实现  

Design and implementation of dual-channel serial RapidIO for multiple transmission modes

作　　者：郭欣童 雷元武[1] 郭阳[1] GUO Xin-tong;LEI Yuan-wu;GUO Yang(School of Computer,National University of Defense Technology,Changsha 410073,China)

机构地区：[1]国防科技大学计算机学院,湖南长沙410073

出　　处：《计算机工程与科学》2019年第2期233-239,共7页Computer Engineering & Science

基　　金：国家自然科学基金(61672526);国防科技大学预研基金(ZK17-03-06)

摘　　要：传统的串行RapidIO2.1接口支持3种通道模式(1×、2×、4×)。在2×或1×模式下,4条物理链路只有2条或1条在进行数据传输,其余链路被闲置,造成带宽浪费;另外,一个RapidIO接口只能与一个目的端互连。基于传统的串行RapidIO2.1接口协议,设计了一种支持双通路传输的串行RapidIO接口,通过PCS层的可配置交叉开关共实现14种传输模式,双通路模式下可同时和两个串行RapidIO接口互连。双通路RapidIO提高了RapidIO系统互连的灵活性和传输带宽。实验结果表明,在1×或2×模式下,双通路传输的传输带宽是传统设计的两倍;4×模式下,双通路RapidIO的有效带宽与传统单通路RapidIO的相同。The traditional serial RapidIO2.1 supports 3 lane modes(1×,2×,and 4×).In 1×or 2×modes,only 1 or 2 lanes out of 4 work for data-transmission while the others are in idle,which brings a result of bandwidth waste.In addition,one RapidIO interface can merely be connected with one destination.We design a dual-channel serial RapidIO interface based on traditional serial RapidIO interface protocol,which supports 14 transmission modes by a configurable crossbar switch on the PCS layer.It can connect 2 serial RapidIO interfaces simultaneously when it works in the dual-channel mode.This design improves the interconnected flexibility and transmission bandwidth of the RapidIO system.Simulation tests prove that the transmission bandwidth of the dual-channel RapidIO is approximately two times of that of the single channel RapidIO under 1×or 2×modes,and approximately equal to that of the single channel serial RapidIO interface under 4×mode.

关 键 词：串行RAPIDIO 通道模式 双通路 互连灵活性 传输带宽 

分 类 号：TP303[自动化与计算机技术—计算机系统结构]