大口径枪弹转子式结弹技术  

Large-diameter Rotor-type Technology of Bullet Knot

作　　者：晏希 李锦 李全俊 金丰护 Yan Xi;Li Jin;Li Quanjun;Jin Fenghu(Center of Ammunition Charging,Automation Research Institute Co.,Ltd.of China South Industries Group Corporation,Mianyang 621000,China)

机构地区：[1]中国兵器装备集团自动化研究所有限公司装药中心,四川绵阳621000

出　　处：《兵工自动化》2019年第2期93-96,共4页Ordnance Industry Automation

摘　　要：针对大口径枪弹成弹自动装配生产有结弹压合力大的特点,提出一种大口径枪弹转子式结弹技术。借鉴小口径枪弹转子式生产模式和生产技术,依据大口径转子式结弹技术的工作原理,分析提升产品生产节拍和质量的改进措施,综合计算装置中凸轮受力情况和所需功率,对其结构等受力情况进行强度分析。结果表明:通过对大口径枪弹转子式结弹装置进行论证,从理论上证明了其研制的可行性。Aiming at the characteristics of large-diameter bullet forming automatic assembly production with large pressure resultant force,the large-diameter rotor-type technology of bullet knot is proposed.Use the small diameter bullet rotor-type production mode and production technology,according to the working principle of the large-diameter rotor-type technology of bullet knot and analyzes the measures for improvement of the cycle time and quality of the product,calculates the force and required power of the cam in the device,and conducts the strength analysis.The analysis results show that the feasibility of the development is proved theoretically by demonstrating the large-diameter rotor-type bullet knot equipment.

关 键 词：转子式 结弹 凸轮 强度分析 

分 类 号：TJ302[兵器科学与技术—火炮、自动武器与弹药工程]