2号催化裂化装置三级旋风分离器技术改造  

TECHNOLOGICAL MODIFICATION OF THREE-STAGE CYCLONE SEPARATORS OF 2# CATALY-TIC CRACKING UNIT

作　　者：杨家兵[1] Yang Jiabing(SINOPEC Wuhan Company,Wuhan,Hubei,430082)

机构地区：[1]中国石油化工股份有限公司武汉分公司,湖北武汉430082

出　　处：《石油化工设备技术》2019年第2期8-11,I0001,共5页Petrochemical Equipment Technology

摘　　要：针对催化裂化能量回收装置高温烟气轮机出现的故障,采用新型导叶式旋风分离技术,提出了新型高效低阻型立管多管式三级旋风分离器(简称三旋)的改造方案。改造后,三旋出口烟气在线采样催化剂浓度为92.5 mg/m^3,粉尘粒径均小于10μm,表明三旋分离性能指标完全达到烟机入口烟气的净化要求,能够保证烟气轮机长周期安全运行。Aiming at the failure of the high temperature flue gas turbine of catalytic cracking energy recovery unit, new guide vane cyclone separation technology was adopted. This paper put forward the mo-dification scheme of new vertical and multi-tube three-stage cyclone separators (three-stage cyclone for short) of high efficiency and low resistance. After modification, the catalyst concentration of flue gas by on-line testing from three-stage cyclone outlet was 92.5 mg/m^3. The particle size of powder was less than 10 microns. This indicated that the performance of three-stage cyclone separation completely met the purification requirements of flue gas of flue gas turbine inlet. This can ensure the long-cycle and safe operation of the flue gas turbine.

关 键 词：催化裂化 旋风分离器 单管 改造 

分 类 号：TE96[石油与天然气工程—石油机械设备]