表面处理对天丝织物活性染料喷墨印花的影响  

Effect of surface treatment of Tencel fabric on its inkjet printing with reactive dyes

作　　者：韩双 房宽峻[1,2] 刘秀明 蔡玉青[3] 安芳芳[1] HAN Shuang;FANG Kuan-jun;LIU Xiu-ming;CAI Yu-qing;AN Fang-fang(School of Textiles,Tianjin Polytechnic University, Tianjin 300387, China;Collaborative Innovation Center for Eco-Textiles of Shandong Province, Qingdao 266071, China;School of Textiles and Clothing, Qingdao University, Qingdao 266071 China)

机构地区：[1]天津工业大学纺织学院,天津300387 [2]山东生态纺织协同创新中心,山东青岛266071 [3]青岛大学纺织服装学院,山东青岛266071

出　　处：《印染》2019年第4期28-31,共4页China Dyeing and Finishing

基　　金：国家重点研发计划资助项目(2017 YFB0309800;2016YFC0400503)

摘　　要：分别采用海藻酸钠和羧甲基纤维素钠对天丝织物进行表面处理,研究表面处理对天丝织物活性染料喷墨印花效果的影响。处理后纤维的表面结构和形貌采用扫描电子显微镜进行表征。结果表明,织物经羧甲基纤维素钠处理后,活性染料喷墨印花颜色性能优于海藻酸钠,防渗化效果较好,但织物耐湿摩擦色牢度和断裂强力较差。Sodium alginate and carboxymethyl cellulose sodium are used to the surface treatment of Tencel fabric. The effect of surface treatment on the ink-jet printing of Tencel fabric with reactive dyes is studied. The surface structure and morphology of the treated fibers are characterized by scanning electron microscopy. The results show that the color properties of reactive dye inkjet printings pre-treated with carboxymethyl cellulose sodium is better than that with sodium alginate, and the anti-flushing effect is good, but the color fastness to wet rubbing and breaking strength of the fabric are poor.

关 键 词：改性 喷墨印花 活性染料 颜色性能 防渗化效果 纤维素纤维 天丝 

分 类 号：TS195.54[轻工技术与工程—纺织化学与染整工程]