检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王宏涛 储满生 鲍继伟 韩冬 曹来更 赵伟 WANG Hong-tao;CHU Man-sheng;BAO Ji-wei;HAN Dong;CAO Lai-geng;ZHAO Wei(School of Metallurgy,Northeastern University,Shenyang 110819,Liaoning,China)
出 处:《钢铁研究学报》2019年第2期103-111,共9页Journal of Iron and Steel Research
基 金:NSFC-辽宁联合基金资助项目(U1808212)
摘 要:在未来相当长一段时期内,高炉-转炉流程仍是钢铁生产的主导流程。高炉炼铁是钢铁工业节能减排的关键环节。碳铁复合炉料新技术是当前最可能实现的低碳高炉炼铁技术。阐明了高炉使用碳铁复合炉料低碳冶炼的原理,系统研究了碳铁复合炉料的制备、冶金性能优化、对含铁炉料还原过程的影响以及对高炉综合炉料熔滴性能的影响及其机理,形成了完整的竖炉法碳铁复合炉料制备和应用技术。结果表明,碳铁复合炉料制备工艺优化条件为15%铁矿B、55%烟煤A、10%烟煤B、20%无烟煤C,压块温度为300℃,1 000℃炭化4 h,此条件下碳铁复合炉料抗压强度达4 970 N,反应性为61.08%,反应后强度达51.23%;混装10%碳铁复合炉料,1 100℃还原时球团还原率提高7.69%;随着碳铁复合炉料添加量的增加,综合炉料软化区间从206.3℃增加到218.9℃,熔化区间从171.1℃降低到124.8℃,滴落率先升高后降低,透气性改善,综合炉料中碳铁复合炉料添加量不宜超过焦炭的30%。Blast furnace(BF)-converter process is dominant for the steel production for a long time in the near future. BF ironmaking is critical for the energy conservation and emission reduction in steel industry. Currently, the utilization of iron-carbon agglomerate(ICA) is most likely to be practically employed in BF. The principle of low carbon BF smelting with charging ICA was clarified. Furthermore, the preparation process and the optimization of the metallurgical properties of ICA were systematically studied. Also, the effects of ICA on the reduction process of iron-bearing burden and the softening-dripping properties of mixed burdens were experimentally investigated. Moreover, the related mechanism was revealed. The integral technology for the preparation and application of ICA manufactured by shaft furnace process was formed. The results showed that the optimized conditions for the preparation of ICA are that the mixtures of 15% iron ore B, 55% bituminous coal A, 10% bituminous coal B, and 20% anthracite C are pressed at 300 ℃ and then carbonized at 1 000 ℃ for 4 h. Under the optimized conditions, the compressive strength, the reactivity, and the post-reaction strength of ICA are 4 970 N, 61.08%, and 51.23%, respectively. Furthermore, with mixed charging 10% ICA, the reduction degree of pellet at 1 100 ℃ is increased by 7.69%. Moreover, with increasing the addition of ICA in mixed burden, the softening zone of mixed burden is increased from 206.3 to 218.9 ℃, while the melting zone is decreased from 171.1 to 124.8 ℃. The dripping ratio is firstly enhanced and then declined, but the permeability is improved. The appropriate addition of ICA in mixed burden is no more than 30% of coke.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28