检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李国柱 Li Guozhu(Yunnan Guoneng Coal and Electricity Co.,Ltd.,Honghe,Yunnan 652301,China)
机构地区:[1]云南国能煤电有限公司,云南省红河市652301
出 处:《中国煤炭》2019年第4期110-113,共4页China Coal
摘 要:为了探究注气开采煤层气后煤层突出危险性发生的变化,以煤的瓦斯放散初速度ΔP作为重要指标,开展了常压吸附下CO_2和CH_4的放散试验。得到在CO_2纯气体下,白龙山煤矿煤样瓦斯放散初速度ΔP为39.5 mmHg,是纯CH_4气体下ΔP(18.6 mmHg)的两倍多。单因素方差分析结果表明,检验统计量F值为7.18,处于显著影响数值范围内,进一步证实了不同CO_2浓度对煤层突出危险性的显著性。In order to explore the change of coal outburst risk after gas injection during gas extraction,the emission experiments of CO 2 and CH 4 under atmospheric pressure adsorption were conducted by taking the indicator Δ P ,the initial velocity of gas emission,as an important index. It is obtained that when the gas was pure CO 2,Δ P was 39.5 mmHg in Bailongshan Coal Mine,which was over twice as much as that (18.6 mmHg) when the gas was pure CH 4. The results of one-way analysis of variance showed that the F value of test statistic was 7.18,which was in the range of obvious significant value and further confirmed the significance of different concentrations of CO 2 on the coal seam outburst risk.
关 键 词:注气增产 煤层突出危险性 放散初速度 方差分析 CO2浓度
分 类 号:TD712[矿业工程—矿井通风与安全]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145