湿磨时间对再生YG8硬质合金组织及性能的影响  

Effects of Wet-milling Time on Microstructure and Properties of YG8 Reclaimed Cemented Carbide

作　　者：刘新国 周师晨 冯亮[1] 彭文屹[1] 杨艳玲 LIU Xinguo;ZHOU Shichen;FENG Liang;PENG Wenyi;YANG Yanling(School of Materials Science & Engineering,Nanchang University,330031,Nanchang,PRC;Jiangxi Province Product Quality Supervision and Testing Institute,330029,Nanchang,PRC;Nanchang No. 2 Middle School,330031,Nanchang,PRC;School of Materials Science & Engineering,Shaanxi University of Science & Technology ,710021,Xi'an,PRC)

机构地区：[1]南昌大学材料科学与工程学院,南昌330031 [2]江西省产品质量监督检测院,南昌330029 [3]南昌二中,南昌330031 [4]陕西科技大学材料科学与工程学院,西安710021

出　　处：《江西科学》2019年第2期273-276,共4页Jiangxi Science

基　　金：国家科技支撑计划项目(2011BAC10B04);江西省铜钨新材料重点实验室(2012-KLP-6);国家自然科学基金项目(51101076);南昌市科技项目

摘　　要：通过扫描电子显微镜(SEM)、X-射线衍射分析技术(XRD)等研究了不同的湿磨时间(分别为18 h、24 h、30 h和36 h)对YG8烧结硬质合金组织和性能的影响。结果表明:在5 MPa压力下1 723 K保温1 h烧结,湿磨时间为36 h,硬质合金合金综合性能最好:其密度为14.71 g/cm^3,HRA90.1,平均强度达3 560 MPa,钴磁7.2%,矫顽磁力15.8 kA/m。在一定范围内,随着湿磨时间的延长可使再生硬质合金强度分布的离散性降低。In this paper, the effect of wet-milling time (18 h, 24 h, 30 h and 36 h, respectively) on microstructure and properties of YG8 reclaimed cemented carbide was investigated by scanning electronic microscopy (SEM), X-ray diffraction analysis and so on. The results show that the optimized properties are obtained, whose density, HRA, average bending strength, Co-% magnetism and coercive force of reclaimed cemented carbide were 14.71 g/cm^3, 90.1, 3 560 MPa, 7.2%, 15.8 kA/m, respectively, when the wet-milling time is 36 h at a pressure of 5 MPa and a temperature of 1 723 K for an hour. With incremental increases in wet-milling time, the discrete distribution of bending strength decreases.

关 键 词：湿磨时间 再生硬质合金 组织 抗弯强度 

分 类 号：TG135.5[一般工业技术—材料科学与工程]