检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:庄龙[1] 许道宝[1] ZHUANG Long;XU Daobao(Nanjing Research Institute of Electronics Technology,Nanjing 210039 ,China)
出 处:《现代雷达》2019年第3期36-41,共6页Modern Radar
摘 要:对合成孔径雷达(SAR)而言,其成像性能的优劣或SAR图像质量可通过成像系统的脉冲响应函数(IRF)来表征。脉冲响应函数可看作是一个理想点目标的成像结果,这一函数由中央主瓣和一些旁瓣组成。SAR系统的图像质量可以通过描述IRF的空间分辨率、峰值旁瓣比、积分旁瓣比等主要特征进行描述和评价。文中主要对工作于VHF/UHF频段的低频大波束角SAR系统的脉冲响应函数(IRF-USAR)特性进行了研究,推导了超宽带大波束角条件下的脉冲响应函数。基于点目标的傅里叶支撑谱与脉冲响应函数之间的对应解析关系,分析了IRF-USAR的响应特性,并基于仿真及实测数据对IRF-USAR响应特性进行了验证。For synthetic aperture radar(SAR),the imaging results can be depicted by the impulse response function(IRF) of the imaging system. IRF can be viewed as the imaging result of an ideal point target. The resolution and side-lobe level can be analyzed by the IRF, and the performance of the imaging system can be further accomplished. In this paper, the IRF of the ultra-wide beam low-frequency SAR system is studied, which is different from the traditional narrow-band and narrow-beam SAR system. The precise IRF of the low-frequency ultra-wide beam SAR is deduced. Based on the relationship of the supported Fourier spectrum and the IRF, the characteristics of the IRF are analyzed and demonstrated by simulated and the real data.
关 键 词:低频合成孔径雷达 脉冲响应函数 大波束角 支撑谱
分 类 号:TN958[电子电信—信号与信息处理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.136.19.165