大型平板微波天线伺服俯仰系统工程设计  

Engineering design on pitch system of large plate microwave antenna

作　　者：夏旭光[1] 姚红萍[1] 刘朝阳[1] XIA Xuguang;YAO Hongping;LIU Chaoyang(The 27th Research Institute of China Electronics Technology Group Corporation,Zhengzhou Henan 450047,China)

机构地区：[1]中国电子科技集团公司第二十七研究所,河南郑州450047

出　　处：《太赫兹科学与电子信息学报》2019年第2期278-282,287,共6页Journal of Terahertz Science and Electronic Information Technology

摘　　要：针对大型平板微波天线俯仰系统进行工程研究,设计了一种强度高、质量轻的桁架结构作为天线背架。根据指标要求建立数学模型,将整个运动过程通过准确的力学计算进行力矩分配,从而选定电机、减速机等结构要件;通过对关键结构件的有限元仿真及高功率微波环境下的电磁兼容性设计,进一步保证整个俯仰系统可靠工作。通过实验验证,承载负载总重达到2 t左右,角速度最高可达10°/s,可以完成0°～70°俯仰运动,定位精确度优于0.1°。实测平板微波天线各项参数均能达到设计要求,微波测试方向图形态良好,波束指向满足要求。The pitching system of a large plate microwave antenna is studied. A truss structure with high strength and light weight is designed as the antenna back frame. According to the index requirements, the mathematical model process is allocated through accurate mechanical calculation to select the structure elements such as motor and reducer. Through the finite element simulation of the key structure and the hardening design of high power microwave, the whole pitch system is further guaranteed to complete the experiment. The load is up to two tons, the rotation speed is 10° per second, and the range of pitch motion is 0°-70°. The positioning accuracy is better than 0.1°. All the parameters can meet the design requirements. The direction pattern of the microwave test is good, and the beam direction meets the requirements.

关 键 词：大型平板微波天线 桁架结构背架 有限元仿真 

分 类 号：TN821.1[电子电信—信息与通信工程]