聚合物绝缘子表面微孔阵列构筑  

Construction of micro-hole array on polymer insulators

作　　者：霍艳坤 刘文元[1] 柯昌凤[1] 罗维熙[1] 段荔[1] HUO Yankun;LIU Wenyuan;KE Changfeng;LUO Weixi;DUAN Li(Northwest Institute of Nuclear Technology,Xi’an Shaanxi 710024,China)

机构地区：[1]西北核技术研究所,陕西西安710024

出　　处：《太赫兹科学与电子信息学报》2019年第2期332-337,共6页Journal of Terahertz Science and Electronic Information Technology

摘　　要：针对表面微孔阵列的构筑方法与微孔阵列参数对绝缘子真空沿面闪络性能的影响,设计了2种阵列结构,利用激光旋转微加工的方法在圆柱形有机玻璃绝缘子侧面进行了2种阵列的构筑,同时控制激光作用参数分别获得直径为300μm与200μm的2种表面微孔,最终得到4种微孔阵列结构。扫描电镜(SEM)与三维轮廓仪分析表明,通过激光旋转微加工的方法,实现了直径分别为300μm与200μm,深度为50μm左右的微孔点阵构筑。沿面闪络测试表明,表面微孔构筑能够有效地提升沿面闪络电压(实验中闪络电压提升50%以上),微孔直径越小提升效果越好;在同种微孔直径下,点阵结构对闪络电压无明显影响。To study the construction method of the surface micro-hole arrays and the effect of lattice parameters on the surface flashover characteristics of the insulators, a couple of lattices are designed and constructed by laser spinning carving on cylindrical Poly Methy-Methacrylate(PMMA) insulators. Then,micro holes with the diameters of 300 μm and 200 μm are acquired by changing the laser parameters.Finally, four kinds of micro-hole lattices are obtained by the combination of hole diameters and the lattice structures. The Scanning Electron Microscopy(SEM) test and 3-D profile analysis of the surface morphology indicated that the designed arrays are obtained on the lateral surface of the cylindrical PMMA insulators by laser treatment with the hole diameters of 300 μm, 200 μm and 50 μm in depth. Surface flashover voltage test shows that construction of micro-hole array on the surface of insulator could enhance the flashover strength of the insulators efficiently(over 50% flashover voltages increase is obtained in the experiment);the flashover voltage increases with the decrease of hole scales, but has no obvious relationship with the array structure.

关 键 词：沿面闪络 有机玻璃 微孔阵列 激光刻蚀 

分 类 号：TM215.3[一般工业技术—材料科学与工程]