检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:田小艳[1] 高超锋[1] 黄捷[1] 王悦 王波[1] 汤粤豫 TIAN Xiaoyan;GAO Chaofeng;HUANG Jie;WANG Yue;WANG Bo;TANG Yueyu(Shaanxi Petroleum Chemical Engineering Research and Design Institute, Xi'an, Shaanxi 710054,China)
机构地区:[1]陕西省石油化工研究设计院
出 处:《塑料》2019年第2期105-108,共4页Plastics
摘 要:通过原位聚合法制备了聚丙烯/氧化石墨烯(PP/GO)复合材料,并以此为母料与聚丙烯溶液共混,制备了不同氧化石墨烯含量的PP/GO复合材料,研究了GO对复合材料力学性能、电性能及热性能的影响。力学性能测试发现,石墨烯能显著提高复合材料的刚性,同时,使其韧性降低。当GO的含量为2.5%时,复合材料的弹性模量和拉伸强度分别提高了700%和82%,而断裂伸长率降低了93%。电性能测试结果发现,PP/GO的渗流阈值为1.5%,在此含量条件下,复合材料的电导能达到10^-2S/m,与PP相比,提高了11个数量级;同时,PP/GO的快速降解温度也提高了250℃。Polypropylene/graphene (PP/GO) nanocomposite was prepared by in-situ polymerization, and PP/GO composite with different GO content were prepared by solution blending of PP and PP/GO as stated above. The effects of GO on mechanical, electrical and thermal properties of composite were studied. The mechanical properties test found that GO could significantly improve the rigidity of the composite material while reducing the toughness. When the content of GO was 2. 5%, the elastic modulus and tensile strength of the composite increased by 700% and 82%, respectively, but the elongation at break decreased by 93%. The electrical properties test results showed that the percolation threshold of PP/GO was 1. 5%, at which the conductivity of the composite could reach to 10^-2 S/m, which was 11 orders of magnitude higher than that of PP. The rapid degradation temperature of PP/GO was 250℃ higher than that of PP.
关 键 词:聚丙烯 石墨烯 原位聚合 热性能 力学性能 电性能
分 类 号:TQ325.14[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.119.99.38