基于SDN的WLAN负载感知切换方案实现  

Implementation of WLAN load aware handover method based on SDN

作　　者：赵国锋[1,2] 黎军 王新恒 陈攀[1] 葛长威 Zhao Guofeng;Li Jun;Wang Xinheng;Chen Pan;Ge Changwei(Institute of Electrical Information & Network Engineering, Chongqing University of Posts & Telecommunications, Chongqing 400065, China;Optical Communication & Network Key Laboratory of Chongqing, Chongqing 400065, China)

机构地区：[1]重庆邮电大学电子信息与网络研究院,重庆400065 [2]重庆市光通信与网络高校重点实验室,重庆400065

出　　处：《计算机应用研究》2019年第5期1454-1458,共5页Application Research of Computers

基　　金：国家自然科学基金资助项目(61402065)

摘　　要：基于软件定义网络将网络的控制平面与转发平面分离,并提供开放的可编程接口等特点,提出一种基于SDN的AP负载感知的切换算法,以减少网络中频繁切换并使AP间负载相对均衡。该方法利用SDN集中控制功能,实时监控AP的网络状态信息,并由控制器判断AP负载状态和预测终端运动状态来辅助切换过程。实验结果表明,该切换方法可以减少切换次数和平衡AP间的负载,保证用户网络服务质量。Based on the software-defined network that separates the control plane of the network from the forwarding plane and provides an open and programmable interface, this paper proposed a handover algorithm based on SDN for AP load sensing to reduce frequent switching in the network and made the load between AP relatively balanced. The method used the centralized control function of SDN to monitor the network status information of the AP in real time and the controller assisted the load status of the AP and predicted the terminal movement status to assist the handover process. The experimental results show that this method can reduce the switching times and balance the load between AP to ensure the quality of service of users.

关 键 词：软件定义网络 可编程接口 负载均衡 信息状态 

分 类 号：TP393[自动化与计算机技术—计算机应用技术]