以松木和枇杷为模板低温烧结制备木材陶瓷  

Preparation of wood ceramics by low temperature sintering with pine and loquat as templates

作　　者：李健 孟邦月 杨远大 LI Jian;MENG Bangyue;YANG Yuanda(School of Materials and Architectural Engineering,Guizhou Normal University,Guiyang 550014,China)

机构地区：[1]贵州师范大学材料与建筑工程学院,贵州贵阳550014

出　　处：《贵州科学》2019年第2期78-81,共4页Guizhou Science

基　　金：贵州省2017年大学生创新创业训练计划项目(教高司函[2017]7号)

摘　　要：以松木和枇杷为模板,炭化后浸渍聚碳硅烷(PCS溶液),在低温下烧结制备出木材陶瓷,并分析了PCS浓度对其烧结制品重量、线收缩率、体积密度和微观形貌的影响。结果表明采用松木和枇杷为模板,浸渍PCS有机溶液,能够在1000℃低温下烧结出具有原始生物形貌的木材陶瓷。Using pine and loquat as templates,after carbonization and impregnation with polycarbosilane(PCS solution),wood ceramics was obtained by low temperature sintering.We analyzed the effects of PCS concentration on the weight,linear shrinkage,bulk density and microscopic morphology of the sintered products.The results showed that,with pine and loquat astemplates,impregnation with PCS solution,wood ceramics with original biological morphology of the templates could besintered at 1000℃.

关 键 词：松木 枇杷 聚碳硅烷 低温烧结 木材陶瓷 

分 类 号：TQ174[化学工程—陶瓷工业]