不等齿距插铣刀铣削稳定域的预测与验证  

Prediction and Verification of Stability Domain of Plunge Milling Cutter with Unequal Pitch

作　　者：王宇[1] 盖竹兴 翟元盛[1] 卢佳鹤 Wang Yu;Gai Zhuxing;Zhai Yuansheng;Lu Jiahe(School of Mechanical Power Engineering,Harbin University of Science and Technology,Harbin 150080,China)

机构地区：[1]哈尔滨理工大学

出　　处：《工具技术》2019年第5期14-19,共6页Tool Engineering

基　　金：国家自然科学基金(51375127);黑龙江省自然科学基金(E2015060)

摘　　要：插铣加工会产生巨大的振动,影响工件的加工质量,减少振动在一定程度上能够提高工件加工质量。本文通过改变插铣刀齿距来控制振动,建立了不等齿距插铣刀的三维动力学模型,应用半离散法对其进行求解;通过模态分析试验得到模态参数,利用MATLAB软件绘制了稳定性叶瓣图;利用DEFORM软件以及试验数据验证了所构建的稳定性叶瓣图的正确性。Plunge milling can produce huge vibration,which affects the machining quality of the workpiece.Reducing vibration can improve the machining quality of the workpiece to a certain extent.In this paper,the vibration is controlled by changing the tooth spacing of the plunge milling cutter.Firstly,a three-dimensional dynamic model of the plunge milling cutter with unequal pitch is established and solved by using semi-discrete method.The modal parameters are obtained by modal analysis test,and the stability lobes diagram is drawn by MATLAB.Finally,DEFORM software and experimental data are used to verify the correctness of the stability lobes diagram.

关 键 词：不等齿距 插铣 稳定性 叶瓣图 

分 类 号：TG714[金属学及工艺—刀具与模具] TH162[机械工程—机械制造及自动化]