正则角联锁组织的矩阵模型及其生成算法  

Matrix model and generation algorithm of regular angle-interlock weave

作　　者：王旭 杜增锋[1] 倪庆清 刘新华[1,2] WANG Xu;DU Zengfeng;NI Qingqing;LIU Xinhua(College of Textile and Clothing,Anhui Polytechnic University,Wuhu,Anhui 241000,China;Science and Technology Public Service Platform for Textile Industry,Anhui Polytechnic University,Wuhu,Anhui 241000,China;Faculty of Textile Science and Technology,Shinshu University,Nagano 3868567,Japan)

机构地区：[1]安徽工程大学纺织服装学院,安徽芜湖241000 [2]安徽工程大学纺织科技公共服务平台,安徽芜湖241000 [3]信州大学纤维学部,日本长野3868567

出　　处：《纺织学报》2019年第5期47-52,共6页Journal of Textile Research

基　　金：安徽省高校优秀青年骨干人才国内外访学研修资助项目(gxfx2017045);安徽工程大学国家自然科学基金预研项目(2015yy02);安徽工程大学科研启动基金项目(2012YQQ008)

摘　　要：为提高正则角联锁组织的设计效率,分析了无衬经纱和有衬经纱正则角联锁组织交织规律,研究了织物参数和交织规律的关系,分别建立了无衬经纱和有衬经纱正则贯穿角联锁组织矩阵模型及其生成算法,给出无衬经纱正则贯穿角联锁组织矩阵中第1接结经纱列向量的赋值算法,以及有衬经纱正则贯穿角联锁组织矩阵中衬经纱矩阵列向量的赋值算法,并对矩阵生成算法进行了验证。结果表明,通过输入纬纱层数即可根据上述算法产生对应的组织矩阵,说明提出的矩阵模型及其生成算法能快速设计出正则角联锁组织矩阵,提高该类组织的设计效率。In order to improve design efficiency of angle-interlock, the interlacing rule of angle-interlock weave without filling and with filling warp yarns were analyzed, and the relationship between weave parameters and interlacing rule was established. The matrix model of angle-interlock weave and generation algorithm were built. The element relationship between column vectors of matrix model on no filling warp yarns and its generation algorithm were established. Then an algorithm for generating regular angle- interlock with filling warp yarns was established by matrix embedding method. The results show that the relative matrix can be generated by inputting weft layers with the algorithm. The regular angle-interlock weave can be produced rapidly, and the design efficiency can be improved by presented matrix model and its generation algorithm.

关 键 词：角联锁组织 交织规律 组织矩阵 生成算法 

分 类 号：TS105.11[轻工技术与工程—纺织工程]