基于Kimos的弧齿锥齿轮倒角刀具设计与应用  

Design and Application of Spiral Bevel Gear Chamfering Tool based on Kimos

作　　者：李敬财[1] 麻俊方 徐文丽[3] 满佳[1] Li Jingcai;Ma Junfang;Xu Wenli;Man Jia(Tianjin University of Technology and Education. Tianjin 300222, China;CNHTC Ji1 nan Axle & Transmission Co., Ltd., Ji' nan 250100, China;Tianjin Petroleum Vocational and Technical College, Tianjin 301607, China)

机构地区：[1]天津职业技术师范大学机械工程学院,天津300222 [2]中国重汽集团济南桥箱有限公司,山东济南250100 [3]天津石油职业技术学院,天津301607

出　　处：《机械传动》2019年第5期152-155,166,共5页Journal of Mechanical Transmission

基　　金：天津市自然科学基金(17JCTPJC47200);天津市高校中青年骨干创新人才培养计划(RC180204);天津科技支撑项目(18YFZCGX00980)

摘　　要：针对目前在国内弧齿锥齿轮端面倒角普遍采用专用倒角机进行加工时,存在着砂轮调整复杂、准备时间长且精度难以保证的缺点,提出采用在数控铣齿机上,利用专用的倒角刀具,使刀具沿设计好的齿廓轨迹进行运动的加工工艺方案,即可以保证倒角的质量一致,且无需再次进行物料搬运,节省人员。基于Kimos软件,实现对这类刀具进行设计、倒角加工工艺过程,并给出了具体设计实例。When the special chamfering machine is widely used to chamfering currently chamfer the end face of spiral bevel gears in the domestic, the adjustment of the grinding wheel is complex, the preparation time is long and the precision is difficult to guarantee. A machining process by using the special chamfering tool to control the movement of the cutter along the designed tooth profile trajectory on a milling machine is proposed, the quality of the chamfering can be ensured, and the material handling is not needed, the personnel is saved. Based on the Kimos software, the design of this kind of tool and the chamfering processing are carried out, and a concrete design example is given.

关 键 词：弧齿锥齿轮 倒角 倒角刀具 

分 类 号：TG71[金属学及工艺—刀具与模具] U463.218[机械工程—车辆工程]