CVC1800轧机辊系的ANSYS建模与分析  

Roll system of CVC1800 mill: An ANSYS-based modeling and analysis

作　　者：陈华[1] 陈胜利 徐致让[3] CHEN Hua;CHEN Sheng-li;XU Zhi-rang(Industrial & Commercial College, Anhui University of Technology, Ma’anshan 243000, China;Technology Center, Ma’anshan Iron and Steel Co.Ltd, Ma’anshan 243000, China;School of Mechanical Engineering, Anhui University of Technology, Ma’anshan 243000, China)

机构地区：[1]安徽工业大学工商学院,安徽马鞍山243000 [2]马鞍山钢铁(集团)技术中心,安徽马鞍山243000 [3]安徽工业大学机械工程学院,安徽马鞍山243000

出　　处：《辽东学院学报（自然科学版）》2019年第2期120-125,共6页Journal of Eastern Liaoning University:Natural Science Edition

基　　金：安徽省教育厅高校优秀青年人才支持计划项目(201814);安徽工业大学优秀青年人才基金项目(201501)

摘　　要：辊形是板形控制最重要的因素,为了较好地控制辊形的目的,文章根据变形特点,采用以APDL命令流构建模型的方法,来确保模型参数的可修改性,用ANSYS将轧机辊系的工作辊和支撑辊一起建模,并通过软件仿真结果再结合工厂实际结果比较,研究发现这样更好的研究轧辊的弹性变形,得到更好控制辊形的结论。According to the deformation characteristics of strip shape, APDL command stream was used to build a model to better control the shape of a roll;therefore, the modifiability of the model parameters could be ensured.By using ANSYS, the working roll and supporting roll of the rolling mill system were modeled together.The simulation results showed that this method was more suitable to study the elastic deformation of the roll by which the roll shape might be better controlled.

关 键 词：辊系 ANSYS 仿真 

分 类 号：TG333[金属学及工艺—金属压力加工]