Using an Inhibitor to Prevent Plasticizer Migration from Polyurethane Matrix to EPDM Based Substrate  

作　　者：Hadi Rezaei-Vahidian Tohid Farajpour Mahdi Abdollahi 

机构地区：[1]Space Transportation Research Institute,Iranian Space Research Center,Tehran,Iran [2]Polymer Reaction Engineering Department,Faculty of Chemical Engineering,Tarbiat Modares University,Tehran,Iran

出　　处：《Chinese Journal of Polymer Science》2019年第7期681-686,共6页高分子科学（英文版）

摘　　要：The loss of adhesion between the propellant and insulator is one of the most important problems in solid propellant motors due to migration of plasticizer to interface of propellant and insulator. In this work, the polyurethane (PU) binder containing DOP plasticizer was used as a polymeric matrix and β-cyclodextrin (β-CD) was applied as inhibitor agent to prevent plasticizer migration from the PU matrix into the ethylene propylene diene monomer (EPDM) substrate. To increase the compatibility of β-CD and PU matrix, a derivative of β-CD has been synthesized using toluene diisocyanate (β-CD-TDI). The synthesized derivative was characterized by MALDI-MS and FTIR-ATR analyses. FTIR-ATR results confirmed the formation of bonding between β-CD and the polymeric network while the MALDIMS results showed that the synthesized derivative contained two β-CD and 7 TDI molecules bonded to β-CD. Investigation of the mechanical properties of PU modified by β-CD-TDI showed a decrease in tensile strength and an increase in elongation at break with increasing β-CD-TDI content. DMTA results showed a decrement in crosslinking density by increasing the β-CD-TDI content. Also, to investigate plasticizer migration, extraction of the DOP plasticizer from samples was performed using dichloromethane solvent and its concentration was measured by gas chromatography. The results of migration evaluation after four months showed that using β-CD as an inhibitor agent in the PU binder could prevent the migration of plasticizer to EPDM substrate.The loss of adhesion between the propellant and insulator is one of the most important problems in solid propellant motors due to migration of plasticizer to interface of propellant and insulator. In this work, the polyurethane(PU) binder containing DOP plasticizer was used as a polymeric matrix and β-cyclodextrin(β-CD) was applied as inhibitor agent to prevent plasticizer migration from the PU matrix into the ethylene propylene diene monomer(EPDM) substrate. To increase the compatibility of β-CD and PU matrix, a derivative of β-CD has been synthesized using toluene diisocyanate(β-CD-TDI). The synthesized derivative was characterized by MALDI-MS and FTIR-ATR analyses. FTIR-ATR results confirmed the formation of bonding between β-CD and the polymeric network while the MALDIMS results showed that the synthesized derivative contained two β-CD and 7 TDI molecules bonded to β-CD. Investigation of the mechanical properties of PU modified by β-CD-TDI showed a decrease in tensile strength and an increase in elongation at break with increasing β-CD-TDI content. DMTA results showed a decrement in crosslinking density by increasing the β-CD-TDI content. Also, to investigate plasticizer migration, extraction of the DOP plasticizer from samples was performed using dichloromethane solvent and its concentration was measured by gas chromatography. The results of migration evaluation after four months showed that using β-CD as an inhibitor agent in the PU binder could prevent the migration of plasticizer to EPDM substrate.

关 键 词：PLASTICIZER migration Β-CYCLODEXTRIN POLYURETHANE 

分 类 号：O6[理学—化学]