检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:庞清乐 马晓玲[2] 鲁高鹏 PANG Qing-le;MA Xiao-ling;LU Gao-peng(School of Information and Control Engineering,Qingdao University of Technology,Qingdao 266520,China;School of Information and Electronic Engineering,Shandong Institute of Business and Technology,Yantai 264005,China)
机构地区:[1]青岛理工大学信息与控制工程学院,山东青岛266520 [2]山东工商学院信息与电子工程学院,山东烟台264005
出 处:《电工电气》2019年第6期5-9,共5页Electrotechnics Electric
基 金:国家自然科学基金项目(61403236)
摘 要:主动配电网中接入了大量分布式电源,导致很多传统的故障定位方法失效,提出了基于波形比较的快速故障定位方法。该方法采用具有分布式控制功能的馈线终端设备实时检测故障电流,当检测到故障电流时,将检测点的故障电流与下游检测点的故障电流进行波形比较,实现故障定位。仿真结果表明,该方法在含分布式电源的主动配电网发生单重故障和多重故障时均能实现正确故障定位。A large number of distributed generations access to the active distribution network,so as to result in the failure of many traditional fault location methods.This paper proposed a fast fault location method based on waveform comparison.This method adopted the feeder terminal units with distributed control function detect fault current in real time.When a feeder terminal unit detected the fault current,it compared the fault current waveform of local detection point with downstream detection point to realize fault location.The simulation results show that the proposed method can realize correct fault location for single phase-to-phase short-circuit fault and multiple phase-to-phase short-circuit fault in active distribution network with distributed generation.
分 类 号:TM773[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.127